444 wheel weight project
-
Harry
- Posts: 2285
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 13367 times
- Been thanked: 9957 times
444 wheel weight project
Yesterday I completed one side of the wheel weights. I used the weights I removed from the 446 that weighed 40 lbs each for 80 lbs per side. Then added the one I had on the 444 but had to adapt transition plates to mount them. These weight 40 lbs also. This puts 120 lbs per side. Now to complete other side.
- Attachments
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
-
Harry
- Posts: 2285
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 13367 times
- Been thanked: 9957 times
Re: 444 wheel weight project
Finished the left side wheel weights today, was a pita. For some reason they just didn’t want to bolt on tge same as tge other side. With a few adjustments and persistence they were bolted on. Now put on the chains and the plow and it will be ready. With the Berco blower I purchased there was the brackets and plastic soft cab that I also might install.
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
-
DavidBarkey
- Posts: 4196
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 20999 times
- Been thanked: 15540 times
Re: 444 wheel weight project
Harry , Take the time and get that cab on. They are calling for milder temps this winter with wider swigs in temp generating large lake effect snow fall events .
Dave
Mad Tractor Builder
Mad Tractor Builder
-
MattA
- Posts: 1292
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 5 times
- Been thanked: 5873 times
Re: 444 wheel weight project
I skipped my cab last year and regretted it.DavidBarkey wrote: ↑Tue Sep 29, 2026 6:37 am Harry , Take the time and get that cab on. They are calling for milder temps this winter with wider swigs in temp generating large lake effect snow fall events .
Ingersoll 4016