Colt Case Ingersoll Garden Tractors

I may start looking for a sleeve hitch for my Case 446. So I’m wondering is there a model number for the right sleeve hitch or does it matter. So will any sleeve hitch off a 444, 446, 448 fit ? My tractor is a 1982. As far as I know. I doubt I’ll find one here in PEI. But I’ll put and ad on somewhere and see what happens. I have 4 or 5 sleeve hitch attachments that I could be using. To do work, not have fun.!

Noel

Hope this helps . As far as I know the only difference in the hitch is the length between the 200 and 400 series . I beleave the is a length difference between the long and short frame for the link in the 400 series .
I have seen detailed plans somewhere where you could make your own as I beleave it would be hard to find up here . Thats all I know on the subject.

https://www.caseingersollparts.com/stor ... -_NEW.html
This is also an option . Not sure what it would cost all in to get to you these days .

Holy cats. That would be pricey.

Noel

Noel, when that cruise ship passes by here I'll throw on a hitch for you, right next to the mower deck!

Thanks Eugen. I think my only luck around here is if someone has a tractor not running, stored some where with a sleeve hitch on it, and wanting to get rid of it.


Noel

Propane57 wrote: ↑Mon Jul 18, 2022 9:41 am Thanks Eugen. I think my only luck around here is if someone has a tractor not running, stored some where with a sleeve hitch on it, and wanting to get rid of it.
Noel

Given your skills I am very surprised you're not making your own. It would be a lot easier than the loader you build for the MF.

Gittin old and lazy Eugen. Was young and lazy when I made the loader.

Noel

Propane57 wrote: ↑Mon Jul 18, 2022 10:12 am Gittin old and lazy Eugen. Was young and lazy when I made the loader.

Noel

were you funnier then or now?

I got a plasma cutter now, if you come and bring 220V to my shed I'll cut the steel for you!

Maysell just pick up the sleeve hitch and deck. If I’m going there. And save you the work of cutting the stuff out.

And I could just give you some money to help pay for you to put in 220 volt.



Noel