Sleeve hitch for a 446 ?

[propane1]

I may start looking for a sleeve hitch for my Case 446. So I’m wondering is there a model number for the right sleeve hitch or does it matter. So will any sleeve hitch off a 444, 446, 448 fit ? My tractor is a 1982. As far as I know. I doubt I’ll find one here in PEI. But I’ll put and ad on somewhere and see what happens. I have 4 or 5 sleeve hitch attachments that I could be using. To do work, not have fun.!

Noel

[DavidBarkey]

Hope this helps . As far as I know the only difference in the hitch is the length between the 200 and 400 series . I beleave the is a length difference between the long and short frame for the link in the 400 series .
I have seen detailed plans somewhere where you could make your own as I beleave it would be hard to find up here . Thats all I know on the subject.

[DavidBarkey]

https://www.caseingersollparts.com/stor ... -_NEW.html
This is also an option . Not sure what it would cost all in to get to you these days .

[propane1]

Holy cats. That would be pricey.

Noel

[Eugen]

Noel, when that cruise ship passes by here I'll throw on a hitch for you, right next to the mower deck!

[propane1]

Thanks Eugen. I think my only luck around here is if someone has a tractor not running, stored some where with a sleeve hitch on it, and wanting to get rid of it.


Noel

[Eugen]

Thanks Eugen. I think my only luck around here is if someone has a tractor not running, stored some where with a sleeve hitch on it, and wanting to get rid of it.
Noel

Given your skills I am very surprised you're not making your own. It would be a lot easier than the loader you build for the MF.

[propane1]

Gittin old and lazy Eugen. Was young and lazy when I made the loader.

Noel

[Eugen]

Gittin old and lazy Eugen. Was young and lazy when I made the loader.

Noel

were you funnier then or now?

I got a plasma cutter now, if you come and bring 220V to my shed I'll cut the steel for you!

[propane1]

Maysell just pick up the sleeve hitch and deck. If I’m going there. And save you the work of cutting the stuff out.

And I could just give you some money to help pay for you to put in 220 volt.



Noel