Low pressure return line hose replacement
-
MattA
- Posts: 1233
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 5 times
- Been thanked: 5598 times
Low pressure return line hose replacement
Both hose #38's (C14619) in my steering tower are leaking just enough to make a mess. Hoses #22 and #37 (C33556 and C33555) look ok. Filter #35 (C33445) has about 340 hours on it. Is there anything else I should take a look at while I'm replacing hoses in the steering tower?
Ingersoll 4016
-
myerslawnandgarden
- Posts: 375
- Joined: Sun Mar 07, 2021 12:17 pm
- Location: Hinckley, IL
- Has thanked: 182 times
- Been thanked: 1965 times
Re: Low pressure return line hose replacement
The C14619 4" hoses are standard 3/4" single cloth braid with a 300 LB working pressure. $5.09 ea from Ingersoll, if you are going to purchase in a bulk length to save a buck, beware of Amazon sellers as there is a lot of 150 LB hose that looks the same. Just make sure what you're buying.
As far as any other items to look at, I'd say just go through all of the hose clamps and make sure they're snug. I prefer to change them out for the better clamps with the stainless liner since they don't cut into the hose as bad.
Bob
As far as any other items to look at, I'd say just go through all of the hose clamps and make sure they're snug. I prefer to change them out for the better clamps with the stainless liner since they don't cut into the hose as bad.
Bob