Page 10 of 55

Re: Case 680E

Posted: Tue Feb 22, 2022 6:19 pm
by Eugen
Hm.. No idea Dave :(

Re: Case 680E

Posted: Mon Feb 28, 2022 10:58 am
by Eugen
I am slowly gathering parts for this tractor.

The feed pump arrived and it seems a pretty good copy of the original.

IMG_6454.jpg

List of parts that arrived and waiting to be installed:

1. Feed pump
2. Oil filter
3. Air filter
4. Primary and secondary fuel filters
5. Air brake hose/line
6. Injection pump seal kit
7. Crankshaft/fan/alternator belts

Can't believe I found Continental belts for $3 each at RockAuto in the clearance section!!! when they cost around $50 elsewhere. :O

Still haven't decided wether to get a rebuild kit for the alternator or just buy a new one. I've measured the stator wires and they seem fine, about 0.4 ohms each winding and no short to the case. The rotor also test fine for continuity. So the rebuild kit, which includes new brushes, regulator, diodes, bearings might work just fine.


But the major issue remains the fuel in the crankcase and for that I need time to work on diagnostic, which I don't have right now. :( oh well, patience patience patience :| :pullhair:

Re: Case 680E

Posted: Mon Feb 28, 2022 11:12 am
by DavidBarkey
If it will come apart , rebuild it . We can turn the commutator her quickly if it needs it .
Patients are for doctors, when in dought swear at it under your breath .

Dave

Re: Case 680E

Posted: Mon Feb 28, 2022 11:35 am
by Timj
DavidBarkey wrote: Mon Feb 28, 2022 11:12 am If it will come apart , rebuild it . We can turn the commutator her quickly if it needs it .
Patients are for doctors, when in dought swear at it under your breath .

Dave
:rofl: :rofl: :rofl:

Re: Case 680E

Posted: Mon Feb 28, 2022 11:49 am
by Eugen
Dave!!! What's the key to decrypt what you're saying? :rofl: secret code? :D

Seriously now, I have taken the alternator apart already, and put it in the dishwasher already :rofl: :rofl: :rofl: yep, :whip: did not catch me do it :clap:


Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced :109: :headbash:

Re: Case 680E

Posted: Mon Feb 28, 2022 11:59 am
by propane1
Should have a female emoji with a rolling pin.
:giggle:
And I swear at things out loud. When nobody’s around. :78:

Noel

Re: Case 680E

Posted: Mon Feb 28, 2022 12:12 pm
by Eugen
Propane57 wrote: Mon Feb 28, 2022 11:59 am Should have a female emoji with a rolling pin.
:giggle:
And I swear at things out loud. When nobody’s around. :78:

Noel
yes we need that

:rofl:

Screen Shot 2022-02-28 at 12.11.31.png

Re: Case 680E

Posted: Mon Feb 28, 2022 1:02 pm
by DavidBarkey
Eugen wrote: Mon Feb 28, 2022 11:49 am Dave!!! What's the key to decrypt what you're saying? :rofl: secret code? :D

Seriously now, I have taken the alternator apart already, and put it in the dishwasher already :rofl: :rofl: :rofl: yep, :whip: did not catch me do it :clap:


Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced :109: :headbash:
:rofl:
Maybe wait on the injector until get the rest sorted out and run a heavy dose of seafoam though them . A lot of times they just dirty .

Dave

Re: Case 680E

Posted: Mon Feb 28, 2022 1:04 pm
by DavidBarkey
Eugen wrote: Mon Feb 28, 2022 12:12 pm
Propane57 wrote: Mon Feb 28, 2022 11:59 am Should have a female emoji with a rolling pin.
:giggle:
And I swear at things out loud. When nobody’s around. :78:

Noel
yes we need that

:rofl:


Screen Shot 2022-02-28 at 12.11.31.png
She looks like an Olga .
:rofl: :rofl:
Dave

Re: Case 680E

Posted: Mon Feb 28, 2022 1:04 pm
by propane1
This one is even scarier. :giggle:

Noel