Case 680E
-
Eugen
- Posts: 5379
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 14075 times
- Been thanked: 17441 times
- Contact:
-
Eugen
- Posts: 5379
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 14075 times
- Been thanked: 17441 times
- Contact:
Re: Case 680E
I am slowly gathering parts for this tractor.
The feed pump arrived and it seems a pretty good copy of the original.
List of parts that arrived and waiting to be installed:
1. Feed pump
2. Oil filter
3. Air filter
4. Primary and secondary fuel filters
5. Air brake hose/line
6. Injection pump seal kit
7. Crankshaft/fan/alternator belts
Can't believe I found Continental belts for $3 each at RockAuto in the clearance section!!! when they cost around $50 elsewhere.
Still haven't decided wether to get a rebuild kit for the alternator or just buy a new one. I've measured the stator wires and they seem fine, about 0.4 ohms each winding and no short to the case. The rotor also test fine for continuity. So the rebuild kit, which includes new brushes, regulator, diodes, bearings might work just fine.
But the major issue remains the fuel in the crankcase and for that I need time to work on diagnostic, which I don't have right now.
oh well, patience patience patience

The feed pump arrived and it seems a pretty good copy of the original.
List of parts that arrived and waiting to be installed:
1. Feed pump
2. Oil filter
3. Air filter
4. Primary and secondary fuel filters
5. Air brake hose/line
6. Injection pump seal kit
7. Crankshaft/fan/alternator belts
Can't believe I found Continental belts for $3 each at RockAuto in the clearance section!!! when they cost around $50 elsewhere.
Still haven't decided wether to get a rebuild kit for the alternator or just buy a new one. I've measured the stator wires and they seem fine, about 0.4 ohms each winding and no short to the case. The rotor also test fine for continuity. So the rebuild kit, which includes new brushes, regulator, diodes, bearings might work just fine.
But the major issue remains the fuel in the crankcase and for that I need time to work on diagnostic, which I don't have right now.
-
DavidBarkey
- Posts: 4094
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 20648 times
- Been thanked: 15135 times
Re: Case 680E
If it will come apart , rebuild it . We can turn the commutator her quickly if it needs it .
Patients are for doctors, when in dought swear at it under your breath .
Dave
Patients are for doctors, when in dought swear at it under your breath .
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
-
Timj
- Posts: 1457
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5376 times
- Been thanked: 5113 times
Re: Case 680E
DavidBarkey wrote: ↑Mon Feb 28, 2022 11:12 am If it will come apart , rebuild it . We can turn the commutator her quickly if it needs it .
Patients are for doctors, when in dought swear at it under your breath .
Dave
no more mow it's time to blow 
-
Eugen
- Posts: 5379
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 14075 times
- Been thanked: 17441 times
- Contact:
Re: Case 680E
Dave!!! What's the key to decrypt what you're saying?
secret code?
Seriously now, I have taken the alternator apart already, and put it in the dishwasher already
yep,
did not catch me do it 
Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced

Seriously now, I have taken the alternator apart already, and put it in the dishwasher already
Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced
-
propane1
- Posts: 2855
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 6799 times
- Been thanked: 10918 times
Re: Case 680E
Should have a female emoji with a rolling pin.
And I swear at things out loud. When nobody’s around.
Noel
And I swear at things out loud. When nobody’s around.
Noel
-
Eugen
- Posts: 5379
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 14075 times
- Been thanked: 17441 times
- Contact:
-
DavidBarkey
- Posts: 4094
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 20648 times
- Been thanked: 15135 times
Re: Case 680E
Eugen wrote: ↑Mon Feb 28, 2022 11:49 am Dave!!! What's the key to decrypt what you're saying?secret code?
![]()
Seriously now, I have taken the alternator apart already, and put it in the dishwasher already![]()
![]()
yep,
did not catch me do it
Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced![]()
![]()
Maybe wait on the injector until get the rest sorted out and run a heavy dose of seafoam though them . A lot of times they just dirty .
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
-
DavidBarkey
- Posts: 4094
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 20648 times
- Been thanked: 15135 times
-
propane1
- Posts: 2855
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 6799 times
- Been thanked: 10918 times