Re: Davis 100 backhoe cylinder seal kit
Posted: Sun Apr 10, 2022 6:23 pm
Harry, The swing arm cylinders are probably full of sludge and should be opened for inspection.
This is what might be in the left hand cylinder
another view of the left hand cylinder
The right hand cylinder sludge
Swing cylinder ram
Removal of the swing cylinder looked a bit daunting. It required removing all of the hoses, pulling the swing gear, removing the swing cylinder mounting brackets, and removing the boom. The boom piping on this unit was crushed and hoses were end of life making part of this tear down redundant.
I was also able to source the OEM Davis parts from a local Case dealer and replaced boom bushings, pins, and rubber swing stop pads.
Dig in or go home,
Spike
Removal of the swing cylinder looked a bit daunting. It required removing all of the hoses, pulling the swing gear, removing the swing cylinder mounting brackets, and removing the boom. The boom piping on this unit was crushed and hoses were end of life making part of this tear down redundant.
I was also able to source the OEM Davis parts from a local Case dealer and replaced boom bushings, pins, and rubber swing stop pads.
Dig in or go home,
Spike