Colt Case Ingersoll Garden Tractors

All I can say is not allowed on the site! I've never in my days of Case ownership seen anything like that. Like you said Dave they are Cast Steel, so they can be welded but still a lot of work. Maybe you can find a replacement.

Keep the Peace
Harry

Harry wrote: ↑Tue Nov 30, 2021 8:24 am All I can say is not allowed on the site! I've never in my days of Case ownership seen anything like that. Like you said Dave they are Cast Steel, so they can be welded but still a lot of work. Maybe you can find a replacement.

Keep the Peace
Harry

All I can say is not allowed on the site!
Sorry Harry , not sure what you mean by this .

If the solid pin was not welded solid on both side I would remove for better look . I have never seen the like of this on a Case from any of the sights .

Dave

@DavidBarkey see if holds at all or I'll give you an axle from the parts tractor I got in Wainfleet that I was thinking to make an articulated something,

Wow...that's some serious carnage. Can't imagine what would have caused it (maybe what Spike described - also crazy!) Welding the pin is the icing on the cake.

Sad that some of these machines have lived such a hard and abusive life. One of my 444's is a little rough around the edges, glad most of its abuse was spared and taken by the blade it came with (I'd never seen something with so many weld repairs before). Was glad to find another blade with a more intact mount.

On the other hand I doubt that there's a single "lawn and garden tractor" on the market these days that would last with even 10% of the damage Dave's machine did. Or would it be possible to fix it yourself if that were the case.

Sent from my Pixel 4a using Tapatalk

DavidBarkey wrote: ↑Tue Nov 30, 2021 6:09 am

Timj wrote: ↑Mon Nov 29, 2021 10:37 pm well Dave, as much as it would be very interesting to know how it was broken, I guess just rub some dirt on it and durability test it. See what kind of a weld job the PO did.

Ya , I think when I have more of it stripped down I will do a static load test with 4 ton porta power. If it is good , great . If it breaks I will know where I stand .

Dave

I think that's a good plan. You're definitely right, that pin is not going to be any fun to get out. But if you need to, now is the best time with the tractor stripped down.
If axle weld passes the test, I know you'll never abuse it enough to break it, or where the pin out.
It's never easy.
Tim

DavidBarkey wrote: ↑Tue Nov 30, 2021 8:33 am

Harry wrote: ↑Tue Nov 30, 2021 8:24 am All I can say is not allowed on the site! I've never in my days of Case ownership seen anything like that. Like you said Dave they are Cast Steel, so they can be welded but still a lot of work. Maybe you can find a replacement.

Keep the Peace
Harry

All I can say is not allowed on the site!
Sorry Harry , not sure what you mean by this .

If the solid pin was not welded solid on both side I would remove for better look . I have never seen the like of this on a Case from any of the sights .

Dave

Dave I was referring to four letter words! LOL

Keep the Peace
Harry

Harry wrote: ↑Wed Dec 01, 2021 7:57 am

DavidBarkey wrote: ↑Tue Nov 30, 2021 8:33 am

Harry wrote: ↑Tue Nov 30, 2021 8:24 am All I can say is not allowed on the site! I've never in my days of Case ownership seen anything like that. Like you said Dave they are Cast Steel, so they can be welded but still a lot of work. Maybe you can find a replacement.

Keep the Peace
Harry

All I can say is not allowed on the site!
Sorry Harry , not sure what you mean by this .

If the solid pin was not welded solid on both side I would remove for better look . I have never seen the like of this on a Case from any of the sights .

Dave

Dave I was referring to four letter words! LOL

Keep the Peace
Harry

Sorry Harry , The elevator still goes to the top but is in maintenance mode most of the time and isn't aloud passengers still these days

Dave

DavidBarkey wrote: ↑Wed Dec 01, 2021 8:32 am

Harry wrote: ↑Wed Dec 01, 2021 7:57 am

DavidBarkey wrote: ↑Tue Nov 30, 2021 8:33 am All I can say is not allowed on the site!
Sorry Harry , not sure what you mean by this .

If the solid pin was not welded solid on both side I would remove for better look . I have never seen the like of this on a Case from any of the sights .

Dave

Dave I was referring to four letter words! LOL

Keep the Peace
Harry

Sorry Harry , The elevator still goes to the top but is in maintenance mode most of the time and isn't aloud passengers still these days

Dave

No problem Dave. Glad to hear your on the mend. God Bless!

Keep the Peace
Harry

He's clearly on the mend Harry, as I keep trying to tell Dave that one of my tractors was left at his place and he forgot about it due to his head bang, but he said no such thing happened. There goes my attempt to take advantage of his memory loss

1/4" #30 chain max work load 1300lbs / minimum breaking 5200lbs as per charts
Did not go to max on Pp ( 4ton) , stopped when chain started to stretch .
Passed the stress test . Who ever did it Knew what they were doing . I just wish they hadn't welded the pin in .
Good enough for me .

Dave