Hello from Ottawa, Ontario - "new" 4016
-
FreddyFont
- Posts: 51
- Joined: Thu Nov 10, 2022 8:34 pm
- Location: Ottawa,Ontario
- Has thanked: 16 times
- Been thanked: 242 times
Hello from Ottawa, Ontario - "new" 4016
New member and first owner of an Ingersoll 4016. I had been looking for one for a long time and was fortunate to get a good deal on a like new "barn find" with rear hydraulic and 36 hours. She has a few blemishes from sitting and was housing a few mice on top of the heat shield so it caused a bit of rust from the moisture around one of the head light. I had to add better ground wire to get them working again, got it all cleaned up and up and running smoothly after changing the fluids and spark plugs. It came with a mower and wood chipper!
-
Spike188
- Posts: 1438
- Joined: Sat Mar 06, 2021 12:58 pm
- Location: Ayr Ontario
- Has thanked: 9534 times
- Been thanked: 5862 times
Re: Hello from Ottawa, Ontario - "new" 4016
@FreddyFont Your have an Case/Ingersoll woodchipper so can we assume that the 4016 has remote hydraulics? Does it have a 3 point hitch? What is the tractor serial number?
Spike Colt - 9 & 10, Case - 108, 118, 444, 446, 448, 646, 646bh, Ingersoll 4016, 4118AH
-
Eugen
- Posts: 5379
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 14075 times
- Been thanked: 17441 times
- Contact:
Re: Hello from Ottawa, Ontario - "new" 4016
A great find for sure, I don't think I've seen one in such good shape around here. All you need is some more attachments!
Thanks for joining the forum and I hope you like it here.
Thanks for joining the forum and I hope you like it here.
-
JSinMO
- Posts: 2024
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 15778 times
- Been thanked: 9031 times
Re: Hello from Ottawa, Ontario - "new" 4016
Welcome. That’s an amazing looking machine!
I think it needs some hours on it!
I think it needs some hours on it!
-
Timj
- Posts: 1457
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5376 times
- Been thanked: 5113 times
Re: Hello from Ottawa, Ontario - "new" 4016
Hope you enjoy your time here and join in.
no more mow it's time to blow 
-
FreddyFont
- Posts: 51
- Joined: Thu Nov 10, 2022 8:34 pm
- Location: Ottawa,Ontario
- Has thanked: 16 times
- Been thanked: 242 times
Re: Hello from Ottawa, Ontario - "new" 4016
Yes, its the Ingersoll wood chipper, has the rear hydro under the seat. No 3pt. Serial starts with 17... if I remember correctly
-
Spike188
- Posts: 1438
- Joined: Sat Mar 06, 2021 12:58 pm
- Location: Ayr Ontario
- Has thanked: 9534 times
- Been thanked: 5862 times
Re: Hello from Ottawa, Ontario - "new" 4016
We should be able to
up
the model year with the serial number.
up the model year with the serial number.
Spike Colt - 9 & 10, Case - 108, 118, 444, 446, 448, 646, 646bh, Ingersoll 4016, 4118AH
-
propane1
- Posts: 2855
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 6799 times
- Been thanked: 10918 times
Re: Hello from Ottawa, Ontario - "new" 4016
Welcome Freddy. Nice looking tractor. I curious about the plastic bubble around the car. Do you have a fan in ther to circulate air every where while storing the car. ?
Noel.
Noel.
-
MattA
- Posts: 1232
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 5 times
- Been thanked: 5593 times
Re: Hello from Ottawa, Ontario - "new" 4016
Very nice 4016. Does yours have the webbed backhoe transaxle? Does it start and run ok from sitting so long?
I scored my 4016 six years ago with 55hrs
I scored my 4016 six years ago with 55hrs
Ingersoll 4016
-
MattA
- Posts: 1232
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 5 times
- Been thanked: 5593 times
Re: Hello from Ottawa, Ontario - "new" 4016
I saw your extra pictures on the other forum. Look's like you also have the backhoe transaxle which is a late model orange frame 4000 series before the switch over to black frames. Mine was built around the year 2000.
While my tractor is in decent shape, yours is much nicer. The previous owner of mine only used mine for snow removal. It had a cab, snowcaster, weights and chains on it year round. I've got some rust between the tower and the seat and in the rims on the seams of the metal from winter salt. I wash my tractor real good in the spring to get the salt off but I'm not sure the previous owner did.
While my tractor is in decent shape, yours is much nicer. The previous owner of mine only used mine for snow removal. It had a cab, snowcaster, weights and chains on it year round. I've got some rust between the tower and the seat and in the rims on the seams of the metal from winter salt. I wash my tractor real good in the spring to get the salt off but I'm not sure the previous owner did.
Ingersoll 4016