The first step was removing the custom mule adaptor.
- Burco mule.jpg (541.79 KiB) Viewed 3713 times
The top belt driven jackshaft was removed from the bower and replaced with motor off of a Case tiller. The original upper sprocket was moved to the blower fan and auger shaft and the motor was fitted with a larger sprocket.
- Pump drive.jpg (354.15 KiB) Viewed 3713 times
An adaptor for 3 point mounting was made from 1 1/2" angle bolted to a 3 point hitch spreader.
- 3 point mount.jpg (561.84 KiB) Viewed 3711 times
Changing blower between tractors is easily achieved with blower rotation corrected by reversing oil flow. This proves handy when blower is jammed by rocks picked up on the gravel drive.
- Mounted.jpg (687.9 KiB) Viewed 3713 times
This was the second season for the conversion. I am thinking about increasing the blower speed to get a better throw but travel speed will be sacrificed in heavy snow.
Spike
