Colt Case Ingersoll Garden Tractors

Got some logs from a farmer nearby. It's a bit tedious unloading them one by one but it beats doing it by hand.

What you doing with all that wood, Eugen

ÀH guy wrote: ↑Sat Aug 21, 2021 7:11 pm What you doing with all that wood, Eugen

I only asked for a few logs and he loaded up the trailer!

The plan is to use these to make a little add on shelter for some of the junk and attachments. Wish me luck, because realistically I have no idea where the time for that will come.

Wood always means work. Heat is produced many times by firewood before it is burnt.
Jan 2021, given Ingy a little workout

Tim

Easy task for the Ingy! Nice blade too Tim!

Frankie doing curls with old hydro pole a couple of years ago . Ignore the date stamp I used an old camera and forgot to set the date .
Dave

Eugen wrote: ↑Sat Aug 21, 2021 11:17 pm Easy task for the Ingy! Nice blade too Tim!

It's close to a full chord of oak, pushes a little going down the hill, but otherwise pulls it around with ease.
The blade is a UB54, don't use it much, mostly play. That will change a little this year as I sold my plow truck. So Ingy is going to get plow duty this year. Got the caster now though. Don't want to think about snow yet.

DavidBarkey wrote: ↑Sun Aug 22, 2021 7:49 am 101_2813.JPG101_2815.JPG101_2814.JPG
Frankie doing curls with old hydro pole a couple of years ago . Ignore the date stamp I used an old camera and forgot to set the date .
Dave

That's a good pick up Dave. Doesn't look like Frankie is having any trouble with it.

Frankie flex muscle Frankie strong!

Dave, you could have used some pallet forks there right? I have been looking for (and missing) some pallet forks! It was a bit too tedious to move the logs one at a time... until I remembered there was another tractor near by

ÀH guy wrote: ↑Sun Aug 22, 2021 8:26 am
It's close to a full chord of oak, pushes a little going down the hill, but otherwise pulls it around with ease.
The blade is a UB54, don't use it much, mostly play. That will change a little this year as I sold my plow truck. So Ingy is going to get plow duty this year. Got the caster now though. Don't want to think about snow yet.

Well, you won't catch me going downhill with any of my Case tractors! Literally you won't catch me because none of mine have the holding valve! I had a 226 with holding valve and sold it cheap apparently I needed the space. :facepalm:

I got now both the little and the big blade. Really wanted a blade and chased them a lot. All of a sudden now I have the loader and I'm asking myself what's with the blades!?