644 lbh upgrade
Posted: Mon Jun 22, 2026 6:25 pm
Built a bucket tooth bar for the 644 lbh. Started with a 1/2” plate cut to size with plasma. Drilled sixteen 5/8” holes to bolt teeth unto plate. Cut sixteen 5/8” bolts to size and beveled end in lathe. Welded beveled end to bottom of 1/2” plate. Made to ends to bolt plate to bucket after drilling bucket. Paint then installed to bucket. Took about a week to fabricate.
While enjoying a cold libation one day after working I came up with the idea to repurpose the unused old 646 rear fenders after making new fenders from an old oil tank. Cut off attachment brackets. Drilled holes in both fenders and bolted in place. Now the fenders completely cover the tires. What do you guys think?
While enjoying a cold libation one day after working I came up with the idea to repurpose the unused old 646 rear fenders after making new fenders from an old oil tank. Cut off attachment brackets. Drilled holes in both fenders and bolted in place. Now the fenders completely cover the tires. What do you guys think?