Page 1 of 1
Case rotiller
Posted: Tue Sep 02, 2025 10:54 am
by TLD89
What type of oil, grease should I use in the crankcase of my J 70 tiller?
Re: Case rotiller
Posted: Tue Sep 02, 2025 12:13 pm
by Spike188
This is what is found in the following manual
newmanuals//More/Case-Rotary-Tiller-H-70-J-70.pdf
Page 13
TILLER CHAIN HOUSING :
The chain housing is properly filled
with multi-purpose gun grease at the factory and will
normally not require further servicing. An inspection
plug is located on the upper right side of the chain housing
and grease can be added at this point if necessary. Check
the chain housing for lubricant at the start of each season
or if there is any evidence of leakage.
Re: Case rotiller
Posted: Tue Sep 02, 2025 7:51 pm
by JSinMO
Spike188 wrote: ↑Tue Sep 02, 2025 12:13 pm
This is what is found in the following manual
newmanuals//More/Case-Rotary-Tiller-H-70-J-70.pdf
Page 13
TILLER CHAIN HOUSING :
The chain housing is properly filled
with multi-purpose gun grease at the factory and will
normally not require further servicing. An inspection
plug is located on the upper right side of the chain housing
and grease can be added at this point if necessary. Check
the chain housing for lubricant at the start of each season
or if there is any evidence of leakage.
after work.jpg
Case and New Holland must have shared some manual writers back in the day. That’s almost the exact verbiage used for the gearbox on my hay rake!