Page 1 of 1
7020 bucket adaptor
Posted: Sun Mar 23, 2025 11:01 pm
by Spaulding
After adding quick attach to my 7020 and buying forks i didnt feel like buying a bucket right away so i bought a blank plate and welded some ears to pin onto the factory bucket so if i wanted to swap back i could, ya it sticks aways out but for what it does moving dirt and mulch around itll work just fine tractors got plenty of rear ballast and grunt to lift more then i can fit in the bucket
Re: 7020 bucket adaptor
Posted: Mon Mar 24, 2025 6:50 am
by DavidBarkey
Nicely done sir .
Re: 7020 bucket adaptor
Posted: Mon Mar 24, 2025 8:46 am
by Toolslinger
That's nice... Going with the adapter really only seems to add a couple inches over what it would be mounting the plate direct. No real loss there. I like this, and I may need to go with it since I haven't wanted to take the time to modify my bucket yet. Got the QT adapter years ago now to use forks, and never changed the bucket. Wasn't an emergency since I have 2 646's, but 1 needs to go, so doing the bucket finally is a solid idea.
Re: 7020 bucket adaptor
Posted: Thu Mar 27, 2025 7:11 pm
by Eugen
That's nice and I'd have liked that on my 644. But how did you bend the plate?!
Well done sir!
Re: 7020 bucket adaptor
Posted: Sat Mar 29, 2025 5:23 pm
by Spaulding
Eugen wrote: ↑Thu Mar 27, 2025 7:11 pm
That's nice and I'd have liked that on my 644. But how did you bend the plate?!
Well done sir!
Thank you, the plate was a blank miniskid steer plate that i welded onto, i have a sheet metal finger brake and 20ton finger brake that fits in my press but no way i was making that plate lol plus it was only 90 bux going to order another one so i can mount my john deere 54in blade on it to