Page 7 of 7
Re: Case 446, Broke Still !
Posted: Tue Jan 25, 2022 12:36 pm
by Eugen
From the picture I think I can say the bottom of the end of the lever was about 6 inches from the ground. Now you can see if yours is far off or very close to this. You can also see how far up the bottom of the caster is, about 3 inches from the ground.

Re: Case 446, Broke Still !
Posted: Tue Jan 25, 2022 1:25 pm
by propane1
Some pictures of measurements. First ones are of the 446. Next ones the 224.
Noel
Oops, pictures in wrong order. 224 first, 446 second. Or non painted 224 and painted pictures 446. Sorry.
Re: Case 446, Broke Still !
Posted: Tue Jan 25, 2022 1:45 pm
by Eugen
Noel, just a side note, you can use the button "Place inline" next to the little picture of the image you upload. That will place the right code wherever your cursor is (blinking thing that shows where you type) such that the picture will not show at the end of the message, but in between the text where you put it. That way you can have control of the order in which pictures show, and also the position within your message.

Re: Case 446, Broke Still !
Posted: Thu Jan 27, 2022 9:25 am
by propane1
Had 446 out for a little test run and some fun. Was a wee little bit of snow down. So wife left with car gave me the chance to clean it up a bit.
Work good. No break down. So I’ve been saying good morning to it while I say good morning to all the other tractors now, no kicking it, for now. Hehe.
We will see how it works in the wet snow on Sunday.
Noel