Page 3 of 3
Re: Auger rpm speed test
Posted: Wed Mar 30, 2022 11:28 am
by propane1
Hehe. Don’t mind me. Just stupid. I was counting the links in the chain. Jumpins. Makes me wonder how I get thru the day. I’ll be alright some day. 47 teeth on the caster on the 446. K84-77 model
And 47 teeth on the caster on the 224. No model on caster.
Noel
Re: Auger rpm speed test
Posted: Wed Mar 30, 2022 11:33 am
by Eugen
Ahaaa! OK, we're on the same page now. We probably all have the same number of teeth
Re: Auger rpm speed test
Posted: Wed Mar 30, 2022 11:36 am
by DavidBarkey
Propane57 wrote: ↑Wed Mar 30, 2022 11:28 am
Hehe. Don’t mind me. Just stupid. I was counting the links in the chain. Jumpins. Makes me wonder how I get thru the day. I’ll be alright some day. 47 teeth on the caster on the 446. K84-77 model
And 47 teeth on the caster on the 224. No model on caster.
Noel
Ok , then the number I did for you will be wrong based on that .
Dave
Re: Auger rpm speed test
Posted: Wed Mar 30, 2022 11:44 am
by propane1
Ya. So can you do the one for the Case 224 with caster I have too Dave. This caster has no model number tag.
Engine pulley 6” belt doesn’t fall into the pulley very far.
Jack shaft pulley 7”. I put this on. Was a 5” on there.
Jack shaft sprocket 16 teeth.
Auger 47 teeth.
Noel
Re: Auger rpm speed test
Posted: Wed Mar 30, 2022 11:45 am
by DavidBarkey
Propane57 wrote: ↑Wed Mar 30, 2022 11:28 am
Hehe. Don’t mind me. Just stupid. I was counting the links in the chain. Jumpins. Makes me wonder how I get thru the day. I’ll be alright some day. 47 teeth on the caster on the 446. K84-77 model
And 47 teeth on the caster on the 224. No model on caster.
Noel
Based on that new info you will be about 850 Auger RPM at 3200 engine RPM
Dave