Auger rpm speed test

[propane1]

Hehe. Don’t mind me. Just stupid. I was counting the links in the chain. Jumpins. Makes me wonder how I get thru the day. I’ll be alright some day. 47 teeth on the caster on the 446. K84-77 model

And 47 teeth on the caster on the 224. No model on caster.

Noel

[Eugen]

Ahaaa! OK, we're on the same page now. We probably all have the same number of teeth

[DavidBarkey]

Hehe. Don’t mind me. Just stupid. I was counting the links in the chain. Jumpins. Makes me wonder how I get thru the day. I’ll be alright some day. 47 teeth on the caster on the 446. K84-77 model

And 47 teeth on the caster on the 224. No model on caster.

Noel

Ok , then the number I did for you will be wrong based on that .

Dave

[propane1]

Ya. So can you do the one for the Case 224 with caster I have too Dave. This caster has no model number tag.
Engine pulley 6” belt doesn’t fall into the pulley very far.
Jack shaft pulley 7”. I put this on. Was a 5” on there.
Jack shaft sprocket 16 teeth.
Auger 47 teeth.


Noel

[DavidBarkey]

Hehe. Don’t mind me. Just stupid. I was counting the links in the chain. Jumpins. Makes me wonder how I get thru the day. I’ll be alright some day. 47 teeth on the caster on the 446. K84-77 model

And 47 teeth on the caster on the 224. No model on caster.

Noel

Based on that new info you will be about 850 Auger RPM at 3200 engine RPM

Dave