Colt Case Ingersoll Garden Tractors

Propane57 wrote: ↑Fri Feb 11, 2022 8:14 am 1C here this morning. 12C or 54F. In the garage. So no propane furnace run last nite. Woo hoo.

Noel

Eugen wrote: ↑Fri Feb 11, 2022 10:12 am Maybe something like this

https://vevor.ca/products/8kw-12v-diese ... 7a9b&_ss=r

I got the ad in an email because once I bought something from Vevor.

My "shop" is a shed 8x12 feet, but it's really just a place to keep some tools. No room to work on anything but the smallest things, and not heated. I work on tractors in the tent or outside. As long as it doesn't rain or is so cold that my fingers freeze in a few minutes, I'm pretty good. Sometimes I close my eyes and day dream how it would be to have a shop large enough to fit a garden tractor in the middle, and tools around the walls. Haha, wake up Eugen!!!

Eugen wrote: ↑Fri Feb 11, 2022 2:00 pm We will all cheer for you @Spike188 if and when you go for it!!!

Spike188 wrote: ↑Fri Feb 11, 2022 12:50 pm @timj made a comment about my storage shed. I have had use of a commercial property on and off between tenant rollover. The property sold last week so everything there was brought home in December, some stored in a trailer, 10 x 10 shed, garage, and outdoors.

I have not had a shop for 20 years of industrial repair business and slowly pushed my wife out of our 20X24 attached garage. It is mostly used to store tools in during the winter. Working with any medium that create odors that will find their way into the house is a no go. Welding, cutting, and parts washing is reserved for outdoors, where heating is beyond my means.

Building a shop is in the planning stage. Lot profile, engineering, cost, size, location on lot, zoning variances and building permits are the first steps in that direction.

Some of the pointers that are being gleaned from previous post are,
building height, and size equal larger heating needs
car hoist height and installation requirements
water
solar panels, heat pump, wood, in floor heat.
power needs, 3 phase equipment is readily available on mills and lathes. Generator, phase converter, or single phase.
last but not least, age and health. (that last one may need a "w" added to it)

Those are just some of the items being looked at alongside building construction, Steel frame, Wood frame, or block. I am calling it my last toybox then who knows what will happen. The neighbors place sold a couple of years ago overpriced because to buyers were after the shop. The house was just a women cave.

Spike

Eugen wrote: ↑Fri Feb 11, 2022 10:12 am Maybe something like this

https://vevor.ca/products/8kw-12v-diese ... 7a9b&_ss=r

I got the ad in an email because once I bought something from Vevor.

My "shop" is a shed 8x12 feet, but it's really just a place to keep some tools. No room to work on anything but the smallest things, and not heated. I work on tractors in the tent or outside. As long as it doesn't rain or is so cold that my fingers freeze in a few minutes, I'm pretty good. Sometimes I close my eyes and day dream how it would be to have a shop large enough to fit a garden tractor in the middle, and tools around the walls. Haha, wake up Eugen!!!