Paint Bomb shaker

[propane1]

Now that you mention the fire extinguisher Gordy , I better do that.

Any way. Made one of those can stirrers. Took about two minutes. Hehe. If any of you like cold drinks, you should have one of these coolers around. A two inch long 3/8” bolt and a nut. Two large washers. Paint can fits in snug. Put every thing into a small drill and spin just above slow. Hold horizontal for a minute, then tip to 45 degrees, while spinning, then back the other way 45 degrees, should hear the ball going back and forth. Then do it in reverse. There all stirred up.

Boy that was quite a ramble.

Noel

[Eugen]

Now that it's become a trend I'll have to make one too!

[Harry]

Now that you mention the fire extinguisher Gordy , I better do that.

Any way. Made one of those can stirrers. Took about two minutes. Hehe. If any of you like cold drinks, you should have one of these coolers around. A two inch long 3/8” bolt and a nut. Two large washers. Paint can fits in snug. Put every thing into a small drill and spin just above slow. Hold horizontal for a minute, then tip to 45 degrees, while spinning, then back the other way 45 degrees, should hear the ball going back and forth. Then do it in reverse. There all stirred up.

Boy that was quite a ramble.

Noel

I have a bunch of old cozies around. I'll have to make one the next time I'm in the shop. Like, tomorrow!

Keep the Peace
Harry

[Gordy]

The only thing that worries me about the cozies is that I have had the bottoms fall out just sliding a beer in and out


Gordy

[DavidBarkey]

Someone posted this in one of the Facebook forums I read. https://www.facebook.com/1208355165/vid ... 361936872/

Dave

[Gordy]

Someone posted this in one of the Facebook forums I read.[url]https://www.facebook.com/1208355165/vid ... 36872//url]

Dave

That requires me to sign in or join FB. Any chance you could copy and paste here what you wanted us to see?


Gordy

[Eugen]

The link doesn't work even with a fb account.

[DavidBarkey]

Try it now . For some reason lately every time I try using the URL button thing get screwed up . Don't why .

Dave

[Eugen]

Now it says content not found.

[DavidBarkey]

Now it says content not found.

Yet when I click on it , it works . Well as an old freind of mine all ways say in case like this . "Well that there is a problem to be solved , but it is way above my pay grade. "
I will try one more time .
https://www.facebook.com/1208355165/vid ... 361936872/


see if this works

Dave