Page 2 of 2
Re: Bigger rear fenders
Posted: Thu Nov 25, 2021 1:56 pm
by Harry
David, hood and cab pics of the 446. This tractor is the one I use for removing snow with the caster. Cab was purchased from someone who had it in his front yard at a great price. He had no idea what kind of tractor it was on and no makings on the cab. PO made 1/2" plywood doors with plexiglass windows. Glass in the windshield and plexiglass in the rear. manual windshield wiper in the front windshield. It usually takes me less than an hour to clean two driveways so no heater needed. Most of the time I hear sweat pants and a hoodie to use tractor in winter. Cab is great for keeping the wind of the driver.
Keep the Peace
Harry
Re: Bigger rear fenders
Posted: Sun Nov 28, 2021 8:55 pm
by Gordy
Harry,
How is your cab supported when tipped back? Mine came with a kickstand.
Gordy
Re: Bigger rear fenders
Posted: Mon Nov 29, 2021 6:26 am
by DavidBarkey
Gordy do you need to flip back to get in ? I could not see a door.
Dave
Re: Bigger rear fenders
Posted: Mon Nov 29, 2021 7:24 am
by Harry
Gordy wrote: ↑Sun Nov 28, 2021 8:55 pm
Harry,
How is your cab supported when tipped back? Mine came with a kickstand.
SAM_0962.JPG
SAM_0960.JPG
SAM_0961.JPG
Gordy
I attached two cables one on each side to support the cab when tilted back. When I get out in my shop, I'll take a pic.
Keep the Peace
Harry
Re: Bigger rear fenders
Posted: Mon Nov 29, 2021 8:21 am
by Gordy
DavidBarkey wrote: ↑Mon Nov 29, 2021 6:26 am
Gordy do you need to flip back to get in ? I could not see a door.
Dave
The cab has a door on the left side. Need to flip the cab back to open the hood and flip the seat pan up for access to the PTO / belt clutch and whatnot under the pan.
Gordy
Re: Bigger rear fenders
Posted: Sat Dec 04, 2021 10:17 am
by Harry
Gordy wrote: ↑Mon Nov 29, 2021 8:21 am
DavidBarkey wrote: ↑Mon Nov 29, 2021 6:26 am
Gordy do you need to flip back to get in ? I could not see a door.
Dave
The cab has a door on the left side. Need to flip the cab back to open the hood and flip the seat pan up for access to the PTO / belt clutch and whatnot under the pan.
SAM_0800.JPG
SAM_0804.JPG
SAM_0805.JPG
Gordy
Sorry for the delay on the pics. I attached a cable on both sides of the cab to the bracket I fabricated to hold the cab when tilted back.
Keep the Peace
Harry
Re: Bigger rear fenders
Posted: Wed Jan 19, 2022 4:35 pm
by DavidBarkey
finally in paint .
couple of days to harden , then install on the chasey .
Dave
Re: Bigger rear fenders
Posted: Wed Jan 19, 2022 4:59 pm
by Doublet
Very Nice job on the fenders!
One of the hardest things to do with some of the Cases is to get on and off.
Terry