soft side cab panels
- DavidBarkey
- Posts: 3156
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17369 times
- Been thanked: 10694 times
soft side cab panels
Picked up the sides , front and back panels from a universal soft side cab . Paid $80 . There in great condition . It will bail be out if I don't get the hard panels done in time for the blower project 446 .
Dave
Mad Tractor Builder
Mad Tractor Builder
- Eugen
- Posts: 5170
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12120 times
- Been thanked: 16373 times
- Contact:
Re: soft side cab panels
You guys with your cushy cabs must be nice
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- DavidBarkey
- Posts: 3156
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17369 times
- Been thanked: 10694 times
Re: soft side cab panels
I am not man enough anymore to go topless int the winter
Dave
Mad Tractor Builder
Mad Tractor Builder
- thebuildist
- Posts: 821
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 840 times
- Been thanked: 3287 times
Re: soft side cab panels
Not that it gets that cold around here... But the older I get the more insulated my torso seems to get...
"Never be afraid to try something new. How hard can it be?"
- propane1
- Posts: 2456
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5832 times
- Been thanked: 8850 times
- Eugen
- Posts: 5170
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12120 times
- Been thanked: 16373 times
- Contact:
Re: soft side cab panels
But in a heated cab you do? an easy way to become a star on youtube Dave!DavidBarkey wrote: ↑Thu Jul 28, 2022 11:48 am I am not man enough anymore to go topless int the winter
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- DavidBarkey
- Posts: 3156
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17369 times
- Been thanked: 10694 times
- thebuildist
- Posts: 821
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 840 times
- Been thanked: 3287 times
Re: soft side cab panels
I could post a video of that on my YouTube channel! But then I'd probably get banned...
"Never be afraid to try something new. How hard can it be?"
- MattA
- Posts: 885
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 2 times
- Been thanked: 3749 times
Re: soft side cab panels
My soft cab is nice when it's 20F with 20+ mph wind. Its usually not much colder when it snows around here. I wear a light jacket in the cab so I don't sweat. Sometimes my feet get cold due to the cab vents at the bottom. Might help if I put boots on
The soft cab does take 2-3hrs to install and about an hour to remove and put away. Most winters lately I feel like I spend more time installing and removing the cab than I do snowblowing.
The soft cab does take 2-3hrs to install and about an hour to remove and put away. Most winters lately I feel like I spend more time installing and removing the cab than I do snowblowing.
Ingersoll 4016
- thebuildist
- Posts: 821
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 840 times
- Been thanked: 3287 times
Re: soft side cab panels
So is there a designated source of heat in these cabs? Or is it just the body heat that accumulates in a sealed space?
I had an old Volvo that I had to drive through the winter, and it had no heater core.
I' tried a 12v heater/windshield defroster. It did nothing.
And I tried running a 5/8 soft copper pipe across the dashboard, which I hooked up to the engine water. That pipe go so hot it would burn you.
But did nothing to warm the car up.
And I had to drive a topless Jeep to college for about a month in northern Illinois in January. No top, no doors, no windshield. I'd wear full-body Carhartts and snowmobile mittens and a full-face helmet. Driving that thing 60mph when it was below zero outside was COLD. The worst part was around my jaw and ears. I didn't have a good balaclava, so I would try to stuff a towel up in the helmet gaps. But the wind would find a way in, and it felt like needles stabbing my ears and neck. After a while I got a windshield installed on that Jeep, and that felt wonderful. SO. MUCH. WARMER.
So I'm trying to imagine being in a cab at 20F or below and how much I'd call it "heated."
Just being out of the wind and the snow spray has to make a huge difference. Do you even need an actual heat source in there?
Just me rambling.
Bob
I had an old Volvo that I had to drive through the winter, and it had no heater core.
I' tried a 12v heater/windshield defroster. It did nothing.
And I tried running a 5/8 soft copper pipe across the dashboard, which I hooked up to the engine water. That pipe go so hot it would burn you.
But did nothing to warm the car up.
And I had to drive a topless Jeep to college for about a month in northern Illinois in January. No top, no doors, no windshield. I'd wear full-body Carhartts and snowmobile mittens and a full-face helmet. Driving that thing 60mph when it was below zero outside was COLD. The worst part was around my jaw and ears. I didn't have a good balaclava, so I would try to stuff a towel up in the helmet gaps. But the wind would find a way in, and it felt like needles stabbing my ears and neck. After a while I got a windshield installed on that Jeep, and that felt wonderful. SO. MUCH. WARMER.
So I'm trying to imagine being in a cab at 20F or below and how much I'd call it "heated."
Just being out of the wind and the snow spray has to make a huge difference. Do you even need an actual heat source in there?
Just me rambling.
Bob
"Never be afraid to try something new. How hard can it be?"