Case 680E
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12099 times
- Been thanked: 16346 times
- Contact:
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12099 times
- Been thanked: 16346 times
- Contact:
Re: Case 680E
I am slowly gathering parts for this tractor.
The feed pump arrived and it seems a pretty good copy of the original.
List of parts that arrived and waiting to be installed:
1. Feed pump
2. Oil filter
3. Air filter
4. Primary and secondary fuel filters
5. Air brake hose/line
6. Injection pump seal kit
7. Crankshaft/fan/alternator belts
Can't believe I found Continental belts for $3 each at RockAuto in the clearance section!!! when they cost around $50 elsewhere.
Still haven't decided wether to get a rebuild kit for the alternator or just buy a new one. I've measured the stator wires and they seem fine, about 0.4 ohms each winding and no short to the case. The rotor also test fine for continuity. So the rebuild kit, which includes new brushes, regulator, diodes, bearings might work just fine.
But the major issue remains the fuel in the crankcase and for that I need time to work on diagnostic, which I don't have right now. oh well, patience patience patience
The feed pump arrived and it seems a pretty good copy of the original.
List of parts that arrived and waiting to be installed:
1. Feed pump
2. Oil filter
3. Air filter
4. Primary and secondary fuel filters
5. Air brake hose/line
6. Injection pump seal kit
7. Crankshaft/fan/alternator belts
Can't believe I found Continental belts for $3 each at RockAuto in the clearance section!!! when they cost around $50 elsewhere.
Still haven't decided wether to get a rebuild kit for the alternator or just buy a new one. I've measured the stator wires and they seem fine, about 0.4 ohms each winding and no short to the case. The rotor also test fine for continuity. So the rebuild kit, which includes new brushes, regulator, diodes, bearings might work just fine.
But the major issue remains the fuel in the crankcase and for that I need time to work on diagnostic, which I don't have right now. oh well, patience patience patience
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- DavidBarkey
- Posts: 3147
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17297 times
- Been thanked: 10643 times
Re: Case 680E
If it will come apart , rebuild it . We can turn the commutator her quickly if it needs it .
Patients are for doctors, when in dought swear at it under your breath .
Dave
Patients are for doctors, when in dought swear at it under your breath .
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
- Timj
- Posts: 1446
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5224 times
- Been thanked: 5045 times
Re: Case 680E
DavidBarkey wrote: ↑Mon Feb 28, 2022 11:12 am If it will come apart , rebuild it . We can turn the commutator her quickly if it needs it .
Patients are for doctors, when in dought swear at it under your breath .
Dave
let's go, it's finally time to blow.
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12099 times
- Been thanked: 16346 times
- Contact:
Re: Case 680E
Dave!!! What's the key to decrypt what you're saying? secret code?
Seriously now, I have taken the alternator apart already, and put it in the dishwasher already yep, did not catch me do it
Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced
Seriously now, I have taken the alternator apart already, and put it in the dishwasher already yep, did not catch me do it
Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- propane1
- Posts: 2451
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5820 times
- Been thanked: 8806 times
Re: Case 680E
Should have a female emoji with a rolling pin.
And I swear at things out loud. When nobody’s around.
Noel
And I swear at things out loud. When nobody’s around.
Noel
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12099 times
- Been thanked: 16346 times
- Contact:
- DavidBarkey
- Posts: 3147
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17297 times
- Been thanked: 10643 times
Re: Case 680E
Eugen wrote: ↑Mon Feb 28, 2022 11:49 am Dave!!! What's the key to decrypt what you're saying? secret code?
Seriously now, I have taken the alternator apart already, and put it in the dishwasher already yep, did not catch me do it
Need to find a way/time to take the injectors to that Toronto shop for an overhaul. And find a diamond mine on the way too, the guy said 150 per injector if parts need replaced
Maybe wait on the injector until get the rest sorted out and run a heavy dose of seafoam though them . A lot of times they just dirty .
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
- DavidBarkey
- Posts: 3147
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17297 times
- Been thanked: 10643 times
- propane1
- Posts: 2451
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5820 times
- Been thanked: 8806 times