Messing around in the shop

[DavidBarkey]

Well done @JSinMO . That probably cost you less than it would have for the gas to go buy one .

[Eugen]

A simple but effective solution, I like that! I've been missing messing around with the welder so this is as good as it gets for me now, reading your adventures, thanks Jeff!

[Harry]

The Mother of invention strikes again! Great job Jeff. I hope your post inspires others. Harry

[JSinMO]

I should go ahead and start working on the brush hog. The blade are stuck and the deck need to be patched in a couple spots.

But I just don’t feel like it! Let’s start on something else.
I’m going to try and fabricobble a carry all from some stuff I have laying around and a few pallets I picked up the other day! The one on the 446 is a little small but still handy to have so I figured why not up size it for the other tractors!

I had this old 3point frame laying around. It’s pretty bent up but after beating on it for awhile I think it will work fine for this!

It’s crooked for sure but it just needs to hold the box. Now for the real ugly. I welded a couple of flanges onto the frame to bolt the box to. My goodness these are some of the worst chicken crap welds I’ve ever done! I wish @Harry was closer, I’d go take some lessons from him!

After I halfa$& welded them in I need to spread them just a bit. I had a bottle jack on them and smacked them with a sledge hammer and the welds didn’t break so as disgusted as I am I’m calling it good

As usual I’m working without a net, or a plan so I’m kinda figuring it out as I go and making changes and adjustments.
Not the smartest way to do but I kinda works for me. I’m not the smartest guy around anyway!
I mocked up what will be the bed and next I’ll make a simple frame to support it.

[Harry]

JSinMo, I like your pics, they tell the story. Harry

[Timj]

I like where you're going, Jeff, I've been kinda halfa$$ed looking for or at building some sort of carryall for our compact tractor. I think it would be much handier than a trailer alot of times, especially in the woods.

[JSinMO]

I like where you're going, Jeff, I've been kinda halfa$$ed looking for or at building some sort of carryall for our compact tractor. I think it would be much handier than a trailer alot of times, especially in the woods.

I agree with you Tim, I think it’s handier in a lot of situations over a trailer. I like this project because it’s easily scalable to what ever tractor you want to use from a GT to as big as you want to go. And it’s not hard to find people that are throwing out used pallets, cant go wrong with free material!

[MattA]

Not the smartest way to do but I kinda works for me. I’m not the smartest guy around anyway!

You got most people beat
Seriously none of my neighbors can change the oil on their riding lawn mowers

[JSinMO]

Not the smartest way to do but I kinda works for me. I’m not the smartest guy around anyway!

Seriously none of my neighbors can change the oil on their riding lawn mowers

I don’t want to believe that Matt, but I know it’s true nowadays. It’s really a shame, although it does open a door if a fella wanted to do some side work out of his garage! I’m pretty far out in the country but a guy that lived in a suburban area could probably have a decent side hustle doing simple jobs that people either don’t know how to do or don’t care to learn.

[MattA]

Not the smartest way to do but I kinda works for me. I’m not the smartest guy around anyway!

Seriously none of my neighbors can change the oil on their riding lawn mowers

I don’t want to believe that Matt, but I know it’s true nowadays. It’s really a shame, although it does open a door if a fella wanted to do some side work out of his garage! I’m pretty far out in the country but a guy that lived in a suburban area could probably have a decent side hustle doing simple jobs that people either don’t know how to do or don’t care to learn.

My neighbor killed his cub cadet a few years back because he didn't know to change the oil. He asked for help changing the oil on the new tractor but never brought it over. I think his father in law did it for him.

I fixed up another neighbors cub cadet because the muffler fell off and he ran it like that until the hood started to deform. I fixed the muffler, hood, installed new blades, changed the oil/oil filter and installed a new valve cover gasket. When I went for a test drive there was a very serious rattle. I found the engine flopping around when engaging forward or reverse. All four engine bolts were several turns loose. He was very appreciative that I took care of it. Months later the valve cover gasket began leaking on the exhaust again but he didn't want me to fix it. Later on something fell off the tractor and it wouldn't move. He didn't want help and paid a few hundred to have it picked up and fixed. This is the same neighbor whose car I had to jumpstart and charge in covid. Very nice guy otherwise...

Three other neighbors get their mowers picked up and serviced.

So I guess I'm the only one around that fixes stuff