Messing around in the shop
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Messing around in the shop
A simple but effective solution, I like that! I've been missing messing around with the welder so this is as good as it gets for me now, reading your adventures, thanks Jeff!
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- Harry
- Posts: 1514
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9403 times
- Been thanked: 6355 times
Re: Messing around in the shop
The Mother of invention strikes again! Great job Jeff. I hope your post inspires others. Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
-
- Posts: 1578
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 12136 times
- Been thanked: 6879 times
Re: Messing around in the shop
I should go ahead and start working on the brush hog. The blade are stuck and the deck need to be patched in a couple spots.
I’m going to try and fabricobble a carry all from some stuff I have laying around and a few pallets I picked up the other day! The one on the 446 is a little small but still handy to have so I figured why not up size it for the other tractors! I had this old 3point frame laying around. It’s pretty bent up but after beating on it for awhile I think it will work fine for this! It’s crooked for sure but it just needs to hold the box. Now for the real ugly. I welded a couple of flanges onto the frame to bolt the box to. My goodness these are some of the worst chicken crap welds I’ve ever done! I wish @Harry was closer, I’d go take some lessons from him! After I halfa$& welded them in I need to spread them just a bit. I had a bottle jack on them and smacked them with a sledge hammer and the welds didn’t break so as disgusted as I am I’m calling it good
As usual I’m working without a net, or a plan so I’m kinda figuring it out as I go and making changes and adjustments.
Not the smartest way to do but I kinda works for me. I’m not the smartest guy around anyway!
I mocked up what will be the bed and next I’ll make a simple frame to support it.
But I just don’t feel like it! Let’s start on something else. I’m going to try and fabricobble a carry all from some stuff I have laying around and a few pallets I picked up the other day! The one on the 446 is a little small but still handy to have so I figured why not up size it for the other tractors! I had this old 3point frame laying around. It’s pretty bent up but after beating on it for awhile I think it will work fine for this! It’s crooked for sure but it just needs to hold the box. Now for the real ugly. I welded a couple of flanges onto the frame to bolt the box to. My goodness these are some of the worst chicken crap welds I’ve ever done! I wish @Harry was closer, I’d go take some lessons from him! After I halfa$& welded them in I need to spread them just a bit. I had a bottle jack on them and smacked them with a sledge hammer and the welds didn’t break so as disgusted as I am I’m calling it good
As usual I’m working without a net, or a plan so I’m kinda figuring it out as I go and making changes and adjustments.
Not the smartest way to do but I kinda works for me. I’m not the smartest guy around anyway!
I mocked up what will be the bed and next I’ll make a simple frame to support it.
- Harry
- Posts: 1514
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9403 times
- Been thanked: 6355 times
Re: Messing around in the shop
JSinMo, I like your pics, they tell the story. Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
- Timj
- Posts: 1446
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5224 times
- Been thanked: 5038 times
Re: Messing around in the shop
I like where you're going, Jeff, I've been kinda halfa$$ed looking for or at building some sort of carryall for our compact tractor. I think it would be much handier than a trailer alot of times, especially in the woods.
let's go, it's finally time to blow.
-
- Posts: 1578
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 12136 times
- Been thanked: 6879 times
Re: Messing around in the shop
I agree with you Tim, I think it’s handier in a lot of situations over a trailer. I like this project because it’s easily scalable to what ever tractor you want to use from a GT to as big as you want to go. And it’s not hard to find people that are throwing out used pallets, cant go wrong with free material!
- MattA
- Posts: 878
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 2 times
- Been thanked: 3707 times
Re: Messing around in the shop
You got most people beat
Seriously none of my neighbors can change the oil on their riding lawn mowers
Ingersoll 4016
-
- Posts: 1578
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 12136 times
- Been thanked: 6879 times
Re: Messing around in the shop
I don’t want to believe that Matt, but I know it’s true nowadays. It’s really a shame, although it does open a door if a fella wanted to do some side work out of his garage! I’m pretty far out in the country but a guy that lived in a suburban area could probably have a decent side hustle doing simple jobs that people either don’t know how to do or don’t care to learn.
- MattA
- Posts: 878
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 2 times
- Been thanked: 3707 times
Re: Messing around in the shop
My neighbor killed his cub cadet a few years back because he didn't know to change the oil. He asked for help changing the oil on the new tractor but never brought it over. I think his father in law did it for him.JSinMO wrote: ↑Sun Nov 26, 2023 12:31 pmI don’t want to believe that Matt, but I know it’s true nowadays. It’s really a shame, although it does open a door if a fella wanted to do some side work out of his garage! I’m pretty far out in the country but a guy that lived in a suburban area could probably have a decent side hustle doing simple jobs that people either don’t know how to do or don’t care to learn.
I fixed up another neighbors cub cadet because the muffler fell off and he ran it like that until the hood started to deform. I fixed the muffler, hood, installed new blades, changed the oil/oil filter and installed a new valve cover gasket. When I went for a test drive there was a very serious rattle. I found the engine flopping around when engaging forward or reverse. All four engine bolts were several turns loose. He was very appreciative that I took care of it. Months later the valve cover gasket began leaking on the exhaust again but he didn't want me to fix it. Later on something fell off the tractor and it wouldn't move. He didn't want help and paid a few hundred to have it picked up and fixed. This is the same neighbor whose car I had to jumpstart and charge in covid. Very nice guy otherwise...
Three other neighbors get their mowers picked up and serviced.
So I guess I'm the only one around that fixes stuff
Ingersoll 4016
- Harry
- Posts: 1514
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9403 times
- Been thanked: 6355 times
Re: Messing around in the shop
Matt, I have a neighbor across the street like that. He has a small yard and used a push mower but this summer he bought a new Cub Cadet. He couldn’t get it to crank over so he asked me to take a look at it. It was something simple. He is a short guy and his legs are short. He had to push the brake pedal down to engage a safety switch. His legs was short so he had to push harder to engage the switch. I think he was embarrassed about it being something so simple. He had a problem with his snowblower. He told me he tried to change the belt but couldn’t get the old one off. Plus when he ran it I could always hear the engine hunting. A few weeks ago I saw a pickup take the blower away. He may of figured to get a plow service for his driveway which is very small, I’m not sure. Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226