Fly ball
-
Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
-
DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10638 times
-
- Posts: 130
- Joined: Wed Nov 02, 2022 9:50 am
- Location: Northern Ontario Canada
- Has thanked: 1160 times
- Been thanked: 675 times
-
DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10638 times
Re: Fly ball
I have worked on a few Onans . but never seen that . I suspect the cage failed jamming the ball .
@keith
I have a good cam shaft Assembly you can have . You just need to figuer out shipping or if someone can pick it up for you .
Last edited by DavidBarkey on Wed May 17, 2023 8:15 am, edited 1 time in total.
Dave
Mad Tractor Builder
Mad Tractor Builder
-
- Posts: 130
- Joined: Wed Nov 02, 2022 9:50 am
- Location: Northern Ontario Canada
- Has thanked: 1160 times
- Been thanked: 675 times
Re: Fly ball
I'm rebuilding an emerald 1 generator engine for my 446 and it has nylon/plastic retainer/cage for the fly balls. Should I use this or change it to the metal one?
-
DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10638 times
Re: Fly ball
I used the the nylon out the genny engine for mine , but it had only 50 hrs on it . Bommer is the one to ask that question I would think . Nylon is know to get brittle with age . That being said , how many hours on it .?
Dave
Mad Tractor Builder
Mad Tractor Builder
-
- Posts: 130
- Joined: Wed Nov 02, 2022 9:50 am
- Location: Northern Ontario Canada
- Has thanked: 1160 times
- Been thanked: 675 times
Re: Fly ball
Not sure of how many hours on the engine, more than yours but just needs a hone to freshen it up.
-
DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10638 times
Re: Fly ball
@keith If you have not already . read this . I have done a couple of these with great success .
onan genny engine rework
onan genny engine rework
Dave
Mad Tractor Builder
Mad Tractor Builder
-
- Posts: 130
- Joined: Wed Nov 02, 2022 9:50 am
- Location: Northern Ontario Canada
- Has thanked: 1160 times
- Been thanked: 675 times
Re: Fly ball
I have read your posts and am thankful for you and everyone else for doing so with pics that helps guys like me that have very little knowledge of mechanics.