For sale - 2 16" tractor rims (bolt spacing 6x6") with solid older AG tires on them - purchased online from Auction - seller identified them as "Kubota Rims w/tires" didn't mention they are both for the right side of a tractor and have different back spacing, and one has an impressive slice on the sidewall (Of course auction photos didn't show any of the flaws) Both Rims are 16-6. One has 7/8 BS the other 2" BS - I measured the stock rim on my 446 Case and it has 2.25" BS
Titan 8-16 AG tire, (tubeless) - 7/8" BackSpacing on Rim - $175.00 cdn
GoodYear 8.3-16 AG tire, with sidewall slice (with tube) - 2" BackSpacing on rim - $125.00 cdn
Sidewall cut
Rim Size
Located in Hamilton, ON - Will sell separately, prices are obo - I'd just like to get my money back out of this deal...
FS - 16" tractor rims
- RoamingGnome
- Posts: 729
- Joined: Sun Jan 08, 2023 12:54 am
- Location: Hamilton, ON
- Has thanked: 10206 times
- Been thanked: 3683 times
FS - 16" tractor rims
'68 Case 195, '84 Case 446, '88 Ingersoll 222 - and 1965 Case 530ck (fullsize backhoe)
-
- Posts: 5247
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12680 times
- Been thanked: 16763 times
- Contact:
- DavidBarkey
- Posts: 3360
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 18393 times
- Been thanked: 11659 times
Re: FS - 16" tractor rims
The one with the 2" back set should be ok and the 7/8" back set should be able to have the centre drill out and reset the back set . I would have to see them to know for sure .
Dave
Mad Tractor Builder
Mad Tractor Builder
- RoamingGnome
- Posts: 729
- Joined: Sun Jan 08, 2023 12:54 am
- Location: Hamilton, ON
- Has thanked: 10206 times
- Been thanked: 3683 times
Re: FS - 16" tractor rims
Yes, you could - but after I got those oddball tire/rims I managed to find 2 genuine Case rims and 6 newer AG tires on FB marketplace...
Two for my 446 and the other 4 for a special project. If the oddballs don't sell, I could always use them as the outer set on a crazy dually setup - just accommodate the different offset in the spacers.
Two for my 446 and the other 4 for a special project. If the oddballs don't sell, I could always use them as the outer set on a crazy dually setup - just accommodate the different offset in the spacers.
Last edited by RoamingGnome on Fri Mar 24, 2023 7:54 am, edited 1 time in total.
'68 Case 195, '84 Case 446, '88 Ingersoll 222 - and 1965 Case 530ck (fullsize backhoe)
- DavidBarkey
- Posts: 3360
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 18393 times
- Been thanked: 11659 times
Re: FS - 16" tractor rims
6 Agg tires , you are either rich or got steal on them .RoamingGnome wrote: ↑Fri Mar 24, 2023 6:54 am Yes, you could - but after I got those oddball tire/rims I managed to find on FB marketplace 2 genuine Case rims and 6 newer AG tires.
PXL_20221123_162423897~2.jpg
Two for my 446 and the other 4 for a special project. If the oddballs don't sell, I could always use them as the outer set if I wanted a crazy dually setup - just accommodate the different offset in the spacers.
Dave
Mad Tractor Builder
Mad Tractor Builder
- RoamingGnome
- Posts: 729
- Joined: Sun Jan 08, 2023 12:54 am
- Location: Hamilton, ON
- Has thanked: 10206 times
- Been thanked: 3683 times
Re: FS - 16" tractor rims
Definitely not rich... The Agg tires were like new take offs - a deal to good to pass up, The two tires for Max (My 446) were a no-brainer... the set of 4 required a couple of minutes of mental the old needs vs wants - BluZuki is too rusty to go back on the road and the tires on it are 25+ years old and so badly weather checked I'm surprised they still hold air... and I do have a set of 16" rims for the Suzuki Samurai...DavidBarkey wrote: ↑Fri Mar 24, 2023 7:05 am 6 Agg tires , you are either rich or got steal on them .
'68 Case 195, '84 Case 446, '88 Ingersoll 222 - and 1965 Case 530ck (fullsize backhoe)
-
- Posts: 5247
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12680 times
- Been thanked: 16763 times
- Contact:
- DavidBarkey
- Posts: 3360
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 18393 times
- Been thanked: 11659 times
Re: FS - 16" tractor rims
Now that I have to see Samurai Mud Worrier .RoamingGnome wrote: ↑Fri Mar 24, 2023 7:35 amDefinitely not rich... The Agg tires were like new take offs - a deal to good to pass up, The two tires for Max (My 446) were a no-brainer... the set of 4 required a couple of minutes of mental the old needs vs wants - BluZuki is too rusty to go back on the road and the tires on it are 25+ years old and so badly weather checked I'm surprised they still hold air... and I do have a set of 16" rims for the Suzuki Samurai...DavidBarkey wrote: ↑Fri Mar 24, 2023 7:05 am 6 Agg tires , you are either rich or got steal on them .
Dave
Mad Tractor Builder
Mad Tractor Builder