I need to make an an adapter the can join to an older j44 style blade.
Anyone who has one of those blades handy, can you tell me or measure for me the center to center distance between the 3/8 bolt holes?
Bob
case mower deck blade bolt holes
- thebuildist
- Posts: 844
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 860 times
- Been thanked: 3416 times
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5280 times
- Been thanked: 5063 times
Re: case mower deck blade bolt holes
I can get you measurement off blade from a 48" deck if you know they are the same.
deck's on, blades sharp, let's go it's time to mow
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5280 times
- Been thanked: 5063 times
Re: case mower deck blade bolt holes
looks like 2 5/8" from a blade from a L46 deck, you'll have to look up the spindle to double check if the 44 is the same.
deck's on, blades sharp, let's go it's time to mow
- MattA
- Posts: 1006
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 3 times
- Been thanked: 4389 times
- thebuildist
- Posts: 844
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 860 times
- Been thanked: 3416 times
Re: case mower deck blade bolt holes
thanks everyone!
Bob
Bob
"Never be afraid to try something new. How hard can it be?"
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5280 times
- Been thanked: 5063 times
Re: case mower deck blade bolt holes
I was just looking at Bob's on-line store and the lh decks all use the same spindles. So the spacing should be the same.
deck's on, blades sharp, let's go it's time to mow
- MattA
- Posts: 1006
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 3 times
- Been thanked: 4389 times
Re: case mower deck blade bolt holes
Bob - Here are my notes on the case blades from when I was doing RM48 mulching blade research.
Case Ingersoll C24442 left hand cut
Center hole dia. - 1-1/4"
Outside hole diameter: 7/16" (some use 3/8”?)
Outside holes center to center: 2-5/8"
Cut Direction: Left
Length: 15-9/16"
Thickness: .187"
Width: 2-1/2"
Case Ingersoll C24442 left hand cut
Center hole dia. - 1-1/4"
Outside hole diameter: 7/16" (some use 3/8”?)
Outside holes center to center: 2-5/8"
Cut Direction: Left
Length: 15-9/16"
Thickness: .187"
Width: 2-1/2"
Ingersoll 4016