Drive motor body leaks
Posted: Wed Dec 08, 2021 6:12 pm
I decided to fix this before became a problem after all assembled . It wasn't leaking yet , but I know Murphy would show up after final assembly and the cab is on like he did when I built cab for Frankie .
Leaving the bottom wheel on makes a great work stand . I would not recommend doing this horizontal. getting ready to open motor barrel Note the rust creeping in for outside where the seal rides seal still good , but cap needs cleaning too Note the white dot , next to cleanliness , correct alignment will make sure the motor turn the correct direction Barrel off, most of the motor left alone . I use a pin to keep everything in line .
Too be continued
Dave
Leaving the bottom wheel on makes a great work stand . I would not recommend doing this horizontal. getting ready to open motor barrel Note the rust creeping in for outside where the seal rides seal still good , but cap needs cleaning too Note the white dot , next to cleanliness , correct alignment will make sure the motor turn the correct direction Barrel off, most of the motor left alone . I use a pin to keep everything in line .
Too be continued
Dave