Shield head baffle?

TLD89 · Post by **TLD89** » Tue Mar 14, 2023 12:07 pm

Just going through part manual and seen a LH shield head baffle extension. c-311415. I have owned a few 3018 and 4020's and they didn't have the baffles on them. Should they have ?

myerslawnandgarden · Post by **myerslawnandgarden** » Tue Mar 14, 2023 9:19 pm

I don't remember a new tractor not having the one that you mention and both of my 4020's still have it. Not sure why, but seems like a PO removed it and did not reinstall.

Bob

thebuildist · Post by **thebuildist** » Wed Mar 15, 2023 10:29 am

TLD89 wrote: ↑Tue Mar 14, 2023 12:07 pm Just going through part manual and seen a LH shield head baffle extension. c-311415. I have owned a few 3018 and 4020's and they didn't have the baffles on them. Should they have ?

I'm looking on Google to see what part you're talking about and I'm not finding it. Is it part of the tins around the muffler?

I'm curious as to whether my 4020 has it or not.

But since I don't yet know what it is, it's hard to know...

Post by **Spike188** » Wed Mar 15, 2023 10:38 am

The part number is C-31415 and is heat sheild over the exhaust tube.

I could not find a manual in our ccigt library and hope to rectify that soon.

Eugen · Post by **Eugen** » Wed Mar 15, 2023 11:02 am

This?

Here's the full pdf, see page 22

MODELS 4016PS, 4018PS, 4020PS – ALL.pdf: (2.63 MiB) Downloaded 4 times

DavidBarkey · Post by **DavidBarkey** » Wed Mar 15, 2023 1:05 pm

Now it makes more sense

TLD89 · Post by **TLD89** » Sat Mar 18, 2023 12:19 pm

Topic of heat shields I know the heat shields are imported but I see a lot of Onan's without the left side metal. Do you think with having it on it holds more heat on the motor or it helps move the air out from the motor?

DavidBarkey · Post by **DavidBarkey** » Sat Mar 18, 2023 4:49 pm

TLD89 wrote: ↑Sat Mar 18, 2023 12:19 pm Topic of heat shields I know the heat shields are imported but I see a lot of Onan's without the left side metal. Do you think with having it on it holds more heat on the motor or it helps move the air out from the motor?

depends on where it is and it job . Exhaust shield are to keep the heat in and engine shrouds are for air flow / cooling . Most important thing with any engine is to allow it idle down and cool down before shutting down .

Harry · Post by **Harry** » Sun Mar 19, 2023 10:17 am

DavidBarkey wrote: ↑Sat Mar 18, 2023 4:49 pm
TLD89 wrote: ↑Sat Mar 18, 2023 12:19 pm Topic of heat shields I know the heat shields are imported but I see a lot of Onan's without the left side metal. Do you think with having it on it holds more heat on the motor or it helps move the air out from the motor?
depends on where it is and it job . Exhaust shield are to keep the heat in and engine shrouds are for air flow / cooling . Most important thing with any engine is to allow it idle down and cool down before shutting down .

I agree David, and warm up too before running at WOT.

Harry

Jancoe · Post by **Jancoe** » Sun Mar 19, 2023 10:35 am

Seems pretty odd not to have those baffles. I've bought and sold probably 60 case ingersolls over the years. They have been on all of the ones I purchased from. There have been maybe 2 or 3 with some missing baffles but that was because the previous owner was trying to repair something and didn't reinstall, but the baffles came with.those were parts machines. I personally would not run my machines without shields in place.

Sent from my SM-S906U using Tapatalk

Colt Case Ingersoll Garden Tractors

Shield head baffle?

Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?

Re: Shield head baffle?