Tractor cabs
- Harry
- Posts: 1840
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 11145 times
- Been thanked: 7950 times
Tractor cabs
I found these tractor cabs on CL this morning. $35 for the full cab and $25 for the half cab. I’ll have to go look at the full cab for $35. That’s sounds like a good deal if the glass is there and not broken. Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
- Harry
- Posts: 1840
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 11145 times
- Been thanked: 7950 times
Re: Tractor cabs
I went to look at the tractor cabs tonight. The full cab that I was interested in turned out to be a let down. It would require to much rework and fabrication to make it work. It had a sliding door on the left side that opened only twenty inches fully open. I sucked in my gut and had to turn sideways to barely make it inside. No glass in the rear but all the rest was intact. I briefly looked at the half cab which all the glass was intact. Measurements were taken and written down to make an educated decision. The left, right and rear windows were sliders, so could be opened for ventilation, but they were stuck shut. So needed TLC to free up without breaking the glass. For $25 dollars you can’t expect much, but has potential for GT I was thinking of putting it on. I’m going to recheck the dimensions on the GT before I pull the trigger. Could be a diamond in the rough. Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226