Page 3 of 3
Re: Hello from S.W. Ontario
Posted: Mon Dec 13, 2021 4:09 pm
by DavidBarkey
Eugen wrote: ↑Mon Dec 13, 2021 3:23 pm
I have to thank you guys for mentioning the carrier bolts, as I never checked or replaced them on any of my tractors. Does anyone know what the torque should be on these bolts? Or do you use typical table values like 180 lbs for "lubricated conditions" of 5/8 bolts UNF ?
@steadfast glad you found sources for the items you were looking for already.
3/8 x 24 unf grade grade 8 bolt should be about 50lbs. torque . That being said it uses a lock nut so there needs to be allowance for that . I know it is in the manuals somewhere . Which of course is on the other computer , and that old thing take 4 hrs to boot up .
Dave
Re: Hello from S.W. Ontario
Posted: Mon Dec 13, 2021 4:13 pm
by Eugen
my bad!!! For some reason in my head it was 5/8
ok ok 3/8 it is.
Re: Hello from S.W. Ontario
Posted: Mon Dec 13, 2021 4:19 pm
by DavidBarkey
Eugen wrote: ↑Mon Dec 13, 2021 4:13 pm
my bad!!! For some reason in my head it was 5/8
ok ok 3/8 it is.
Just found the torque . It is 50 foot lbs with new lock nut , as per manual ..
Dave
Re: Hello from S.W. Ontario
Posted: Mon Dec 13, 2021 7:20 pm
by Harry
steadfast wrote: ↑Fri Dec 10, 2021 5:44 pm
I just picked up a 1980 Case 446 today. I am quite impressed with the clever designs and engineering that has gone into these tractors.
There is a couple of things that need some TLC. A paint job for starters, front pivot pin kit, the rear hitch kit is missing and the steering pinion/rack is sloppy. Is there a place in Canada where parts for these tractors can be had? If not here then the US.
Welcome steadfast. I'm a little late coming to the party, eh! Yes, the 446 is a very nice machine and with some tweaking you should have a great machine that will last your lifetime! Good luck on your new to you 446!
Keep the Peace
Harry