Page 1 of 3

Hello from Ottawa, Ontario - "new" 4016

Posted: Fri Nov 11, 2022 9:14 pm
by FreddyFont
New member and first owner of an Ingersoll 4016. I had been looking for one for a long time and was fortunate to get a good deal on a like new "barn find" with rear hydraulic and 36 hours. She has a few blemishes from sitting and was housing a few mice on top of the heat shield so it caused a bit of rust from the moisture around one of the head light. I had to add better ground wire to get them working again, got it all cleaned up and up and running smoothly after changing the fluids and spark plugs. It came with a mower and wood chipper!

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Fri Nov 11, 2022 9:41 pm
by Spike188
@FreddyFont Your have an Case/Ingersoll woodchipper so can we assume that the 4016 has remote hydraulics? Does it have a 3 point hitch? What is the tractor serial number?

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Fri Nov 11, 2022 9:42 pm
by Eugen
A great find for sure, I don't think I've seen one in such good shape around here. All you need is some more attachments!

Thanks for joining the forum and I hope you like it here.

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Fri Nov 11, 2022 10:29 pm
by JSinMO
Welcome. That’s an amazing looking machine!
I think it needs some hours on it!

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Fri Nov 11, 2022 10:51 pm
by Timj
:wave2: welcome to CCIGT @FreddyFont good to have you here. Your tractor is an awesome find, :thumbsup: they're some great little workhorses. Should give you years of service. I bought my 4118 new 1993, over 1300 hrs.
Hope you enjoy your time here and join in. :highfive:
:geek: Tim

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Fri Nov 11, 2022 10:58 pm
by FreddyFont
Spike188 wrote: Fri Nov 11, 2022 9:41 pm @FreddyFont Your have an Case/Ingersoll woodchipper so can we assume that the 4016 has remote hydraulics? Does it have a 3 point hitch? What is the tractor serial number?
Yes, its the Ingersoll wood chipper, has the rear hydro under the seat. No 3pt. Serial starts with 17... if I remember correctly

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Fri Nov 11, 2022 11:13 pm
by Spike188
We should be able to :j up
the model year with the serial number.

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Sat Nov 12, 2022 4:40 am
by propane1
Welcome Freddy. Nice looking tractor. I curious about the plastic bubble around the car. Do you have a fan in ther to circulate air every where while storing the car. ?

Noel.

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Sat Nov 12, 2022 5:17 am
by MattA
Very nice 4016. Does yours have the webbed backhoe transaxle? Does it start and run ok from sitting so long?

I scored my 4016 six years ago with 55hrs 👍

Re: Hello from Ottawa, Ontario - "new" 4016

Posted: Sat Nov 12, 2022 5:38 am
by MattA
I saw your extra pictures on the other forum. Look's like you also have the backhoe transaxle which is a late model orange frame 4000 series before the switch over to black frames. Mine was built around the year 2000.

While my tractor is in decent shape, yours is much nicer. The previous owner of mine only used mine for snow removal. It had a cab, snowcaster, weights and chains on it year round. I've got some rust between the tower and the seat and in the rims on the seams of the metal from winter salt. I wash my tractor real good in the spring to get the salt off but I'm not sure the previous owner did.