Page 3 of 6
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 1:54 pm
by Timj
I just seen this same issue discussed in one of the FB groups, JB weld, good epoxy, and gorilla glue were the most common fixes.
You sure have a way of finding trouble, Noel, or is it trouble finding you?
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 1:58 pm
by propane1
Figured I’d clean up the timing marks on flywheel and bearing plate.
Noel
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 4:42 pm
by DavidBarkey
Propane57 wrote: ↑Tue Mar 15, 2022 10:12 am
Looks like you were right Dave.
Noel
Shhhhhh don't tell the
. She will expect it more often .
Dave
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 4:45 pm
by DavidBarkey
Propane57 wrote: ↑Tue Mar 15, 2022 9:52 am
Hehe. More trouble. Governor spring and arm worn bad.
Nothing to do with my timing trouble thou.
Noel
Spring buy new , Arm , if just the hole can be fixed by weld or upgrading linkage .
Dave
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 5:06 pm
by Eugen
Propane57 wrote: ↑Tue Mar 15, 2022 1:58 pm
Figured I’d clean up the timing marks on flywheel and bearing plate.
Noel
What's the T mark for? Tea? Tape? Tuna?
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 5:16 pm
by propane1
Top dead centre.
Noel
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 5:18 pm
by propane1
DavidBarkey wrote: ↑Tue Mar 15, 2022 4:45 pm
Propane57 wrote: ↑Tue Mar 15, 2022 9:52 am
Hehe. More trouble. Governor spring and arm worn bad.
Nothing to do with my timing trouble thou.
Noel
Spring buy new , Arm , if just the hole can be fixed by weld or upgrading linkage .
Dave
I have more engines that may have better parts Dave.
Noel
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 5:21 pm
by propane1
DavidBarkey wrote: ↑Tue Mar 15, 2022 4:42 pm
Propane57 wrote: ↑Tue Mar 15, 2022 10:12 am
Looks like you were right Dave.
Noel
Shhhhhh don't tell the
. She will expect it more often .
Dave
Gotta like that emoji. Tells you exactly what’s what. And I laugh every time I see it.
Noel
Re: Kohler k321 static timing.
Posted: Tue Mar 15, 2022 7:57 pm
by Harry
Propane57 wrote: ↑Tue Mar 15, 2022 5:21 pm
DavidBarkey wrote: ↑Tue Mar 15, 2022 4:42 pm
Propane57 wrote: ↑Tue Mar 15, 2022 10:12 am
Looks like you were right Dave.
Noel
Shhhhhh don't tell the
. She will expect it more often .
Dave
Gotta like that emoji. Tells you exactly what’s what. And I laugh every time I see it.
Noel
I have to agree with you more and more about the emoji!
Keep the Peace
Harry
Re: Kohler k321 static timing.
Posted: Wed Mar 16, 2022 3:40 pm
by propane1
So got some new JB Weld and got every thing cleaned up and magnets back in place. Will see how things go tomorrow. They might all fall off.
Noel