you definitely got your work cut out for you Tim. I'm probably not understanding well, but you say adding a power cylinder blade to the front, yet you're talking about quick couplers at the back.Timj wrote: ↑Mon Aug 08, 2022 10:37 am Not much to report from this weekend, tractor time was limited to about an hour of measuring up and planning out the selector valve installation, and getting the last of the needed parts and hoses ordered. Because everything ties together, now is the time to get it done as it gets put back together.
Did get a little seat time today shuttling things around.
As I don't know how having and using the two tractors is going to work out in the future, and as long as both will be getting new mid-lift hoses, I have decided to set both tractors up identical. Same selector valve in similar location, HH34 3pt set up with hydraulic quick couplers so it can be moved to either tractor. The quick couplers will also be set up to hook up hoses from other hydraulic power needs. (Future project, adding a power angle cylinder to the front blade)
Similar to you, no seat time for me. On Saturday we had a new stove/oven delivered, the old one was old and broke down, we figured a new one makes more sense. A little scary with all the electronics they come now, it's connected to wi-fi ! So it got delivered just as our little dog was taking his last breaths (longer story ). Was one of those weekends, where you are reminded everything ends and moments in life are precious. There, inserted a little ramle in your thread Tim, hope you don't mind.