Got a little more prepared today, put the blower on the 4118, will wait on the chains till snow.
Put a set of chains I had from a pickup truck on the 448, they're a little long. I kinda hate to cut them down. I'll have to figure something out. There is definitely less clearance to the fender from the side wall than the 4118.
The tractors got moved into their new winter home. Their previous space was taken over by my welding trailer and some other equipment.
Not totally ready, but closer.
Tim
Winter Prep 2022
- Timj
- Posts: 1447
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5229 times
- Been thanked: 5050 times
- MattA
- Posts: 882
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 2 times
- Been thanked: 3734 times
-
- Posts: 1591
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 12186 times
- Been thanked: 6955 times
- Timj
- Posts: 1447
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5229 times
- Been thanked: 5050 times
Re: Winter Prep 2022
I jockeyed alot of stuff around to make that space. Eventually it will all find its place, but there's been a lot of shuffling. Also want to get started on some work on that shed this winter so getting it somewhat cleared out will help.
let's go, it's finally time to blow.
- Eugen
- Posts: 5168
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12117 times
- Been thanked: 16362 times
- Contact:
- DavidBarkey
- Posts: 3153
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17347 times
- Been thanked: 10679 times
Re: Winter Prep 2022
Tim , if thy are 4 links chains . Deflate the tires , take some of these starting in centre of the chains and work out untill short enough . MakeTimj wrote: ↑Sun Dec 04, 2022 6:16 pm Got a little more prepared today, put the blower on the 4118, will wait on the chains till snow.
Put a set of chains I had from a pickup truck on the 448, they're a little long. I kinda hate to cut them down. I'll have to figure something out. There is definitely less clearance to the fender from the side wall than the 4118.
The tractors got moved into their new winter home. Their previous space was taken over by my welding trailer and some other equipment.
KIMG0583.JPG
Not totally ready, but closer.
Tim
sections 2 link spacing .
then reinflate . You may need to jip tie the links down as well .
Dave
Mad Tractor Builder
Mad Tractor Builder