644 wouldn't move today
Posted: Fri Sep 23, 2022 6:40 pm
My 644 has set for a week or longer with no use. Fired it up today and when I pushed the right-side foot pedal to move it went to the floor and stayed there. I lifted it with the rear stabilizers and the bucket, then put some jack stands under it. I noticed the pedal control rod had broken in two right where it goes through the pedal rod. Not having one in my back pocket to replace it with, I removed the broken one. Went into the shop and looked into my bolt drawers to find a hardened 5/16" bolt just the right length. I cut the head off the bolt and drilled a small hole near that end where a spring goes. Crawled back under the tractor and installed the makeshift part and the tractor was ready to rock and roll. A quick observation of the control "banana" plate shows a bit of wear, so I ordered a rebuild kit that includes a new control rod. An afternoon project for this winter in the shop when I don't use this machine. Sorry no Pics.
I used it to move a few buckets full of dirt and the tractor moved fine.
Keep the Peace
Harry
I used it to move a few buckets full of dirt and the tractor moved fine.
Keep the Peace
Harry