Tire shops use it to fix pitted aluminum rims with bead leaks.Case 644 loader repairs
-
RoamingGnome
- Posts: 639
- Joined: Sun Jan 08, 2023 12:54 am
- Location: Hamilton, ON
- Has thanked: 9051 times
- Been thanked: 3261 times
Re: Case 644 loader repairs
@Eugen Yup... clean the crustys off the tire bead and then try some tire bead sealant - a local NAPA or auto parts store should have it... or Amazon (I did a quick look at Cdn Tire's website but that seemed to be a waste of time. it's a rubbery goo that gets brushed on the tire bead/rim and pretty much glues the rim to the tire - filling any voids... it will make removing the tire a lot more challenging the next time though. Tire shops use it to fix pitted aluminum rims with bead leaks.
Liquid stuff like "slime" that's good for fixing nail holes and small punctures won't work because it stays on the tread area of the tire...
Tire shops use it to fix pitted aluminum rims with bead leaks.Liquid stuff like "slime" that's good for fixing nail holes and small punctures won't work because it stays on the tread area of the tire...
'68 Case 195, '84 Case 446, '88 Ingersoll 222 - and 1965 Case 530ck (fullsize backhoe)
-
DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10637 times
Re: Case 644 loader repairs
FYI I use good quality tubes regardless .
You may keep the change .
You may keep the change .
Dave
Mad Tractor Builder
Mad Tractor Builder
-
Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Case 644 loader repairs
You're right on Dave!DavidBarkey wrote: ↑Thu May 11, 2023 5:09 pm FYI I use good quality tubes regardless .
You may keep the change .
Looking for tubes
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
-
RoamingGnome
- Posts: 639
- Joined: Sun Jan 08, 2023 12:54 am
- Location: Hamilton, ON
- Has thanked: 9051 times
- Been thanked: 3261 times
Re: Case 644 loader repairs
Yup... Going to take more than black glue to fix those tired sneakers... 
Let me know where the best place to get inner tubes is... I can see a set in my future too...
Let me know where the best place to get inner tubes is... I can see a set in my future too...
'68 Case 195, '84 Case 446, '88 Ingersoll 222 - and 1965 Case 530ck (fullsize backhoe)
-
Spike188
- Posts: 1073
- Joined: Sat Mar 06, 2021 12:58 pm
- Location: Ayr Ontario
- Has thanked: 5825 times
- Been thanked: 4138 times
Re: Case 644 loader repairs
@Eugen do you want the 2 tires I took off of the rims you trade with me. The tires are weather checked but better than yours. I will be at Atlantic in the morning.
Spike Colt - 9 & 10, Case - 108, 118, 444, 446, 448, 646, 646bh, Ingersoll 4016, 4118AH
-
Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Case 644 loader repairs
I appreciate the offer Eugene. I cannot go to Toronto tomorrow.
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
-
Spike188
- Posts: 1073
- Joined: Sat Mar 06, 2021 12:58 pm
- Location: Ayr Ontario
- Has thanked: 5825 times
- Been thanked: 4138 times
Re: Case 644 loader repairs
I could leave them at Atlantic or a friends about 15 minutes from there if you want them.
Spike Colt - 9 & 10, Case - 108, 118, 444, 446, 448, 646, 646bh, Ingersoll 4016, 4118AH
-
Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Case 644 loader repairs
@Spike188 if you could leave them at Atlantic it would be best, I have nowhere else other than the university but that's far and Atlantic is not a big detour for me anyway.
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
-
DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10637 times
Re: Case 644 loader repairs
For quality tubes , Contact Tire Busters near me . Plus you can get hd ones that are meant for liquid loading .
Dave
Mad Tractor Builder
Mad Tractor Builder
-
Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Case 644 loader repairs
Thank you @DavidBarkey, if the tires from @Spike188 cannot be used without tubes I'll give them a call.
Quick question: other than for liquid loading, are the HD tubes desirable or can I get more normal ones? I don't intend to load them with liquid.
Quick question: other than for liquid loading, are the HD tubes desirable or can I get more normal ones? I don't intend to load them with liquid.
Case 224, 444, 644, 680E
Kubota B26
Kubota B26