Page 29 of 34
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 7:40 am
by Eugen
Thanks guys!
@DavidBarkey the boys love digging holes, but covering them not so much.
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 10:21 am
by Eugen
Got a question for you guys because I can't find much info or the operator manual for this. The undercarriage, the tracks and the wheels on which they crawl are all steel. Is there anything I can do to refresh the whole mechanism?
@Timj said in the beginning to soak the tracks in diesel, we're you serious about that? Any other advice?
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 10:56 am
by RoamingGnome
Eugen wrote: ↑Tue May 23, 2023 10:21 am
Got a question for you guys because I can't find much info or the operator manual for this. The undercarriage, the tracks and the wheels on which they crawl are all steel. Is there anything I can do to refresh the whole mechanism? @Timj said in the beginning to soak the tracks in diesel, we're you serious about that? Any other advice?
If the tracks are like big machines - when old machines would sit for a long time and track links would seize up - old guys would talk about spraying / soaking the pins and bushings holding the links together with a used oil/diesel mixture to help lubricate them and cut down on the squealing, As for the rollers, they would have a small cavity filled during assembly with gear oil to lubricate the bushings/axle shaft... That's on the big boys though - really have no idea what would be hiding under your Davis trencher...
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 12:01 pm
by Eugen
Thanks Gerry! According to the parts diagram the rollers have bearings. And you're right, the tracks are squealing when moving
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 12:22 pm
by RoamingGnome
For a machine the size of your trencher I'm sure a couple of spray cans of your favourite penetrating oil would work too - used oil/diesel combo is just cheap and in plentiful supply around most heavy shops
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 2:52 pm
by Eugen
RoamingGnome wrote: ↑Tue May 23, 2023 12:22 pm
For a machine the size of your trencher I'm sure a couple of spray cans of your favourite penetrating oil would work too - used oil/diesel combo is just cheap and in plentiful supply around most heavy shops
I got oil and diesel I can mix and spray the tracks.
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 3:18 pm
by Timj
Soaking them up was a little help if they were rusted solid to get them moving again. Otherwise not much you can do, steel tracks running steel on steel in the dirt are noisy.
That'll make it easier to here the boys heading out of the yard.
Re: Case/Davis trencher backhoe
Posted: Tue May 23, 2023 10:36 pm
by JSinMO
@Eugen i don’t know if any of this will be helpful, or if you’ve already seen these, forgive me if it’s not. I was poking around this evening and found a few links that may help with information. Some of it may be a bit convoluted but I figured any info is good info. Hope some of this helps.
Price Brothers Equipment has Trencher Parts 877-957-9577
Here’s an eBay CA link to a parts catalog
https://www.ebay.ca/itm/J-I-Case-Tf-300 ... 8966441db6
Here are some exploded views for a 700 trencher.
https://spare.avspart.com/catalog/case/ ... 53/769934/
https://spare.avspart.com/catalog/case/ ... 53/801107/
I think Gerry and Tim are right. I’d soak the tracks with what ever you have. And search hi and low for grease fittings! Track pins won’t have any but the rollers and idlers might.
Re: Case/Davis trencher backhoe
Posted: Wed May 24, 2023 11:01 am
by Eugen
Jeff, I appreciate! Looking through the links I found a fellow in the UK selling the operator manual. It's a little pricey so I'm thinking about it.
The reality is that a proper assessment of the whole crawler system would be done only with full disassembly and I must admit, I'm trying to avoid it.
I feel somewhat low on energy to tackle a big task like this right now.
Will mix diesel with oil and apply it to the tracks, after another pressure wash to get the soil and sand off. But right now the D100 backhoe is still waiting to be finished.
Re: Case/Davis trencher backhoe
Posted: Wed May 24, 2023 11:23 pm
by Eugen