Ready to mow
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5257 times
- Been thanked: 5062 times
Ready to mow
spring has been slow coming here but I'm finally ready to mow. Got the 4118 ready to go tonight, oil change, sharpened blades, and deck on, ready to go. Sorry no pics.
deck's on, blades sharp, let's go it's time to mow
- MattA
- Posts: 900
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 2 times
- Been thanked: 3829 times
Re: Ready to mow
Springs been slow here too. I've been mowing about a month now. I left my hydravac off and I'm using your blow the grass onto the grass your mowing next approach. It seems to mulch up the grass good as long as the grass isn't really thick and tall. I used to blow the clippings where I've already mowed. Saves me up to 2hrs vs installing my bagger, mowing, dumping the bags way too many times and removing the bagger.
Ingersoll 4016
- DavidBarkey
- Posts: 3174
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17447 times
- Been thanked: 10771 times
- propane1
- Posts: 2464
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5846 times
- Been thanked: 8893 times
Re: Ready to mow
I might do ours this week. The Case 224 is what I’ll use. May make a video of that. Grass long in places and not in other places. But near time to even it all out.
15C today and 20C tomorrow. But rain all weekend.
Noel
15C today and 20C tomorrow. But rain all weekend.
Noel
- propane1
- Posts: 2464
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5846 times
- Been thanked: 8893 times
Re: Ready to mow
Well, weather people wrong again, so no rain. Mostly sunny today. So mowed grass at my sons place. MF16 was used.
Noel
Noel
- propane1
- Posts: 2464
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5846 times
- Been thanked: 8893 times
Re: Ready to mow
So I did cut the grass the other evening with the Case 224 and newly repaired deck. All worked great. I did do a video of it. Here’s a few pictures. I’ll see if I can post the video. Can’t remember how to do that.
Noel
Noel
- propane1
- Posts: 2464
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5846 times
- Been thanked: 8893 times
Re: Ready to mow
Hehe. We'll see if this works. If it does I wish I could remember how I did it. Hehe. Jumpins my memory is some bad.
Noel
https://youtu.be/R9SFmDTkjeI
Noel
https://youtu.be/R9SFmDTkjeI
- propane1
- Posts: 2464
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5846 times
- Been thanked: 8893 times
Re: Ready to mow
Jumpins the video worked. Any way, more grass cutting today at my sons place. MF16 and maybe a MF7 will be on the job today. But could be a Yardworks tin tractor being used instead of the MF7. Will see what happens.
Have a great weekend.
Noel
Have a great weekend.
Noel
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5257 times
- Been thanked: 5062 times
Re: Ready to mow
Nice job Noel.
I got home a little early last night, it had been a long week. It was a nice unwinding to get on the tractor and cut some grass.
I got home a little early last night, it had been a long week. It was a nice unwinding to get on the tractor and cut some grass.
deck's on, blades sharp, let's go it's time to mow
- Eugen
- Posts: 5173
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12133 times
- Been thanked: 16392 times
- Contact:
Re: Ready to mow
Nice video Noel! I like the sound of that Kohler!
Case 224, 444, 644, 680E
Kubota B26
Kubota B26