Fixing mowing deck for Case 224.

Utility blade, snow caster, mower deck, weights, sleeve hitch, 3pt hitch, front end loader, backhoe, and more. Ready made or homemade.
User avatar
Eugen Canada
Posts: 5141
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 11934 times
Been thanked: 16194 times
Contact:

Re: Fixing mowing deck for Case 224.

Post by Eugen »

If I were you Noel, I would clean the metal well with brake cleaner, then would wire brush, and apply a coat of krud kutter rust gel. Wipe that and then paint with rust paint. That should last a long time. The rust paint I got from home hardware seems to be really good. I used it on my snowcaster.

I really liked your video!
Case 224, 444, 644, 680E
Kubota B26 :blush:
User avatar
propane1 Canada
Posts: 2426
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8669 times

Re: Fixing mowing deck for Case 224.

Post by propane1 »

Eugen wrote: Thu Mar 16, 2023 12:02 am If I were you Noel, I would clean the metal well with brake cleaner, then would wire brush, and apply a coat of krud kutter rust gel. Wipe that and then paint with rust paint. That should last a long time. The rust paint I got from home hardware seems to be really good. I used it on my snowcaster.

I really liked your video!
Thanks Eugen. I’ll look up the krud kutter rust gel.

Noel
User avatar
Harry United States of America
Posts: 1483
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9159 times
Been thanked: 6197 times

Re: Fixing mowing deck for Case 224.

Post by Harry »

Noel, the blue rod is an expensive rod that sure works good. I’ve used them before, but GM was paying for them, not me. E6010 or 11 may want to stick to the metal more than the E6013. With some practice on scrap metal you’ll get the hang of it. I enjoyed your video a lot, much appreciated. :peace: Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
Eugen Canada
Posts: 5141
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 11934 times
Been thanked: 16194 times
Contact:

Re: Fixing mowing deck for Case 224.

Post by Eugen »

propane1 wrote: Thu Mar 16, 2023 4:38 am Thanks Eugen. I’ll look up the krud kutter rust gel.

Noel
Dave uses this too. It's the only product we have here that contains phosphoric acid. It converts surface rust to a black oxide that is a primer for painting.

https://canadiantire.ca/en/pdp/must-for ... 89178.html


This is the liquid version but they have a gel too. The gel tends to penetrate more. I have used both. If a white dust remains on the surface it needs to be wiped.

The reason I mentioned the paint is that I even used it on still rusted surface on a cement mixer because the weather was turning bad and there was no time for proper preparation. I think this paint also contains some rust inhibitor. It's the hh own brand called beautytone alkyd rust paint. It's expensive but I got some on sale.

All I know is that a little cleaning and some good paint will protect the steel much better than oil.
Case 224, 444, 644, 680E
Kubota B26 :blush:
User avatar
propane1 Canada
Posts: 2426
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8669 times

Re: Fixing mowing deck for Case 224.

Post by propane1 »

Eugen wrote: Thu Mar 16, 2023 7:49 am
propane1 wrote: Thu Mar 16, 2023 4:38 am Thanks Eugen. I’ll look up the krud kutter rust gel.

Noel
Dave uses this too. It's the only product we have here that contains phosphoric acid. It converts surface rust to a black oxide that is a primer for painting.

https://canadiantire.ca/en/pdp/must-for ... 89178.html


This is the liquid version but they have a gel too. The gel tends to penetrate more. I have used both. If a white dust remains on the surface it needs to be wiped.

The reason I mentioned the paint is that I even used it on still rusted surface on a cement mixer because the weather was turning bad and there was no time for proper preparation. I think this paint also contains some rust inhibitor. It's the hh own brand called beautytone alkyd rust paint. It's expensive but I got some on sale.

All I know is that a little cleaning and some good paint will protect the steel much better than oil.
Thanks Eugen.

Noel
User avatar
Timj United States of America
Posts: 1438
Joined: Thu Mar 04, 2021 9:57 pm
Location: Central WI
Has thanked: 5169 times
Been thanked: 4985 times

Re: Fixing mowing deck for Case 224.

Post by Timj »

Nice video Noel. I'm kinda thinking that down the road you'll be doing the same repair to the left side of the deck.
I don't have any experience with that blue rod. I would recommend picking up some 6011 and play with it a little to get use to it before using on a repair, probably will need to turn your heat down a little. It penetrates well but spatters more, it does a good job with uncleaned and rusty metal. I would keep some of the 6013 around for clean stuff, it is so easy to weld new metal with and look nice.
:geek: Tim
:446cart: let's go, it's finally time to blow. :peace:
User avatar
propane1 Canada
Posts: 2426
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8669 times

Re: Fixing mowing deck for Case 224.

Post by propane1 »

Timj wrote: Thu Mar 16, 2023 9:24 am Nice video Noel. I'm kinda thinking that down the road you'll be doing the same repair to the left side of the deck.
I don't have any experience with that blue rod. I would recommend picking up some 6011 and play with it a little to get use to it before using on a repair, probably will need to turn your heat down a little. It penetrates well but spatters more, it does a good job with uncleaned and rusty metal. I would keep some of the 6013 around for clean stuff, it is so easy to weld new metal with and look nice.
:geek: Tim
Your right Tim. It will have to be replaced at some point.
I should have cut out the whole piece from side to side front to back. Made a template of it and got it made at the metal shop with the holes cut out for the 3 spindles. Oh well. That’s the way it goes.

Noel
User avatar
propane1 Canada
Posts: 2426
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8669 times

Re: Fixing mowing deck for Case 224.

Post by propane1 »

Hehe. A picture of the deck now. I found some rust converter in the cabinet. Could be 20 to 30 years old. Hehe. Any way, slopped some of that on. Seemed to turn black. I’ll find some 10 to 20 year old paint in the. Cabinet to throw on it tomorrow. Hard to say what colour it will be, but hoping for black. So nobody can see my work that good. Hehe.

Noel
Attachments
0320033D-6B62-43DF-83E2-C87640B4553B.jpeg
User avatar
thebuildist United States of America
Posts: 814
Joined: Mon Jul 26, 2021 5:09 pm
Location: Atlanta, ga
Has thanked: 837 times
Been thanked: 3242 times

Re: Fixing mowing deck for Case 224.

Post by thebuildist »

It looks perfect from here!

Bob
"Never be afraid to try something new. How hard can it be?"
User avatar
propane1 Canada
Posts: 2426
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8669 times

Re: Fixing mowing deck for Case 224.

Post by propane1 »

So I’m getting there. Found some Home Hardware semi gloss black rust paint in the cabinet. It’s only 5 years old or so, almost new paint ! So slopped that on today. Tomorrow I’ll see if I can get the pulleys back on, and get the belt installed. Have a little welding underneath to do. Only a few minutes worth. Not sure what it’s called, but it’s sorta a slide to help keep the deck from digging in, in the middle of the deck at the back. Some decks, like my MF 14 or the YT16H ford has rollers there.

Noel
Attachments
7832869D-C769-40F0-AA9A-4B76429442BF.jpeg
86146E4E-3503-4183-BCED-4F5E3CEA6B31.jpeg
Post Reply