Colt Case Ingersoll Garden Tractors

I need to make an an adapter the can join to an older j44 style blade.

Anyone who has one of those blades handy, can you tell me or measure for me the center to center distance between the 3/8 bolt holes?

Bob

I can get you measurement off blade from a 48" deck if you know they are the same.

looks like 2 5/8" from a blade from a L46 deck, you'll have to look up the spindle to double check if the 44 is the same.

I have some notes on this I can get you later.

thanks everyone!

Bob

thebuildist wrote: ↑Sun Nov 13, 2022 5:00 pm thanks everyone!

Bob

I was just looking at Bob's on-line store and the lh decks all use the same spindles. So the spacing should be the same.

Bob - Here are my notes on the case blades from when I was doing RM48 mulching blade research.

Case Ingersoll C24442 left hand cut
Center hole dia. - 1-1/4"
Outside hole diameter: 7/16" (some use 3/8”?)
Outside holes center to center: 2-5/8"
Cut Direction: Left
Length: 15-9/16"
Thickness: .187"
Width: 2-1/2"