case mower deck blade bolt holes

Utility blade, snow caster, mower deck, weights, sleeve hitch, 3pt hitch, front end loader, backhoe, and more. Ready made or homemade.
User avatar
thebuildist United States of America
Posts: 814
Joined: Mon Jul 26, 2021 5:09 pm
Location: Atlanta, ga
Has thanked: 837 times
Been thanked: 3239 times

case mower deck blade bolt holes

Post by thebuildist »

I need to make an an adapter the can join to an older j44 style blade.

Anyone who has one of those blades handy, can you tell me or measure for me the center to center distance between the 3/8 bolt holes?

Bob
"Never be afraid to try something new. How hard can it be?"
User avatar
Timj United States of America
Posts: 1438
Joined: Thu Mar 04, 2021 9:57 pm
Location: Central WI
Has thanked: 5169 times
Been thanked: 4984 times

Re: case mower deck blade bolt holes

Post by Timj »

I can get you measurement off blade from a 48" deck if you know they are the same.
:446cart: let's go, it's finally time to blow. :peace:
User avatar
Timj United States of America
Posts: 1438
Joined: Thu Mar 04, 2021 9:57 pm
Location: Central WI
Has thanked: 5169 times
Been thanked: 4984 times

Re: case mower deck blade bolt holes

Post by Timj »

looks like 2 5/8" from a blade from a L46 deck, you'll have to look up the spindle to double check if the 44 is the same.
KIMG0564.JPG
:446cart: let's go, it's finally time to blow. :peace:
User avatar
MattA United States of America
Posts: 859
Joined: Sun Mar 07, 2021 1:57 pm
Location: Swansea MA
Has thanked: 2 times
Been thanked: 3586 times

Re: case mower deck blade bolt holes

Post by MattA »

I have some notes on this I can get you later.
Ingersoll 4016
User avatar
thebuildist United States of America
Posts: 814
Joined: Mon Jul 26, 2021 5:09 pm
Location: Atlanta, ga
Has thanked: 837 times
Been thanked: 3239 times

Re: case mower deck blade bolt holes

Post by thebuildist »

thanks everyone!

Bob
"Never be afraid to try something new. How hard can it be?"
User avatar
Timj United States of America
Posts: 1438
Joined: Thu Mar 04, 2021 9:57 pm
Location: Central WI
Has thanked: 5169 times
Been thanked: 4984 times

Re: case mower deck blade bolt holes

Post by Timj »

thebuildist wrote: Sun Nov 13, 2022 5:00 pm thanks everyone!

Bob
I was just looking at Bob's on-line store and the lh decks all use the same spindles. So the spacing should be the same.
:446cart: let's go, it's finally time to blow. :peace:
User avatar
MattA United States of America
Posts: 859
Joined: Sun Mar 07, 2021 1:57 pm
Location: Swansea MA
Has thanked: 2 times
Been thanked: 3586 times

Re: case mower deck blade bolt holes

Post by MattA »

Bob - Here are my notes on the case blades from when I was doing RM48 mulching blade research.

Case Ingersoll C24442 left hand cut
Center hole dia. - 1-1/4"
Outside hole diameter: 7/16" (some use 3/8”?)
Outside holes center to center: 2-5/8"
Cut Direction: Left
Length: 15-9/16"
Thickness: .187"
Width: 2-1/2"
Ingersoll 4016
Post Reply