Colt Case Ingersoll Garden Tractors

In one of my parts buying deals I ended up with this 15hp horizontal shift clone of an engine, basically new starts at first key. The po was going to use it to repower a 444. I find myself not knowing what to do with it. Originally I was going to use it to build a loader on that 444. Now that my loader itch has been addressed by the 644...

That's simple!

My home shipping address is.....

But first you have to tell me what you'd do with it!

You can't use that on a Case tractor. It's the wrong color!!

Versatile little engines . I have a 13 hp on a dump tractor I built . Hooking up remote throttle and choke cables were a pain though. But it works good .
Dave

Last week I saw a youtube video for a home made stump grinder. Then there was one for a homemade chipper/shredder


Gordy

I have a stump grinder that has a 13hp Honda engine on it. It works very well it just takes some time to grind deep enough. I've used this a lot over the last ten years and have been careful not to hit any rocks that tear up the carbides.

Keep the Peace
Harry

Harry wrote: ↑Sun Aug 01, 2021 10:33 am I have a stump grinder that has a 13hp Honda engine on it. It works very well it just takes some time to grind deep enough. I've used this a lot over the last ten years and have been careful not to hit any rocks that tear up the carbides.

Keep the Peace
Harry

A stump grinder would probably be the most useful thing for me. Will have to look into getting carbides for the cutting wheel.

I did have one break off. I silver brazed in it's place a piece of a carbide cutting tool.

Keep the Peace
Harry