What to do with this

[Eugen]

In one of my parts buying deals I ended up with this 15hp horizontal shift clone of an engine, basically new starts at first key. The po was going to use it to repower a 444. I find myself not knowing what to do with it. Originally I was going to use it to build a loader on that 444. Now that my loader itch has been addressed by the 644...

[thebuildist]

That's simple!

My home shipping address is.....

[Eugen]

But first you have to tell me what you'd do with it!

[mendonsy]

You can't use that on a Case tractor. It's the wrong color!!

[DavidBarkey]

Versatile little engines . I have a 13 hp on a dump tractor I built . Hooking up remote throttle and choke cables were a pain though. But it works good .
Dave

[Gordy]

Last week I saw a youtube video for a home made stump grinder. Then there was one for a homemade chipper/shredder


Gordy

[Harry]

I have a stump grinder that has a 13hp Honda engine on it. It works very well it just takes some time to grind deep enough. I've used this a lot over the last ten years and have been careful not to hit any rocks that tear up the carbides.

Keep the Peace
Harry

[Eugen]

I have a stump grinder that has a 13hp Honda engine on it. It works very well it just takes some time to grind deep enough. I've used this a lot over the last ten years and have been careful not to hit any rocks that tear up the carbides.

Keep the Peace
Harry

A stump grinder would probably be the most useful thing for me. Will have to look into getting carbides for the cutting wheel.

[Harry]

I did have one break off. I silver brazed in it's place a piece of a carbide cutting tool.

Keep the Peace
Harry