resizing carb linkage

Everything about Kohler, Onan, B&S, Honda, and other engines.
User avatar
DavidBarkey Canada
Posts: 3108
Joined: Sat Mar 06, 2021 10:35 am
Location: Waverley On.
Has thanked: 17070 times
Been thanked: 10413 times

resizing carb linkage

Post by DavidBarkey »

The link between the govn. and carb had a some ware . Here is my fix .
worn end
worn end
braised up
braised up
after ruffing in with file , used old drill chuck to make nice and round and parallel
after ruffing in with file , used old drill chuck to make nice and round and parallel
like new with a brass bearing area and no more slop
like new with a brass bearing area and no more slop
This was on a Onan but would work on anything .
Dave
Mad Tractor Builder
User avatar
propane1 Canada
Posts: 2426
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8669 times

Re: resizing carb linkage

Post by propane1 »

I would of done the same. Nice fix Dave.

Noel
User avatar
Eugen Canada
Posts: 5141
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 11934 times
Been thanked: 16195 times
Contact:

Re: resizing carb linkage

Post by Eugen »

Brazing is something I'd like to know how to do better. Very nice Dave!
Case 224, 444, 644, 680E
Kubota B26 :blush:
User avatar
DavidBarkey Canada
Posts: 3108
Joined: Sat Mar 06, 2021 10:35 am
Location: Waverley On.
Has thanked: 17070 times
Been thanked: 10413 times

Re: resizing carb linkage

Post by DavidBarkey »

Eugen wrote: Sun Jan 29, 2023 7:53 pm Brazing is something I'd like to know how to do better. Very nice Dave!
When ever you have time and something needing braising . Stop by I will give you a few pointer hen you just need to practise .
Dave
Mad Tractor Builder
Post Reply