resizing carb linkage
- DavidBarkey
- Posts: 3360
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 18393 times
- Been thanked: 11659 times
resizing carb linkage
The link between the govn. and carb had a some ware . Here is my fix .
This was on a Onan but would work on anything .Dave
Mad Tractor Builder
Mad Tractor Builder
- propane1
- Posts: 2577
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 6090 times
- Been thanked: 9473 times
-
- Posts: 5247
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12680 times
- Been thanked: 16763 times
- Contact:
- DavidBarkey
- Posts: 3360
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 18393 times
- Been thanked: 11659 times
Re: resizing carb linkage
When ever you have time and something needing braising . Stop by I will give you a few pointer hen you just need to practise .
Dave
Mad Tractor Builder
Mad Tractor Builder
-
- Posts: 165
- Joined: Sun Mar 21, 2021 8:03 pm
- Location: Hemlock, MI
- Has thanked: 18 times
- Been thanked: 568 times
Re: resizing carb linkage
Your linkage is worn much more than I have seen before. Was the engine hunting for several years?DavidBarkey wrote: ↑Sun Jan 29, 2023 5:31 pm The link between the govn. and carb had a some ware . Here is my fix .
20230129_151828.jpg20230129_152748.jpg20230129_153707.jpg20230129_153743.jpg
This was on a Onan but would work on anything .
That issue, but on some travel control linkages, forced me to invent the travel control linkage that I now make. Two others I know of copied it. One of which claims he created it. And, if that is bad enough, he claims my linkage break. But it is a lie.
My Grasshopper control linkages gave me the idea. The same parts are used; it takes decades before they even start to go bad.
That linkage has sold pretty well. I now buy parts in lots of 100. I customized the parts to make it even better than the first and second versions, which was a few years ago now. I improved the ease of installation; it could be said that it was self-serving since I installed one or a lot myself. I also improved the geometry to be closer to the original linkage.