Page 1 of 1
Wish me luck!!!
Posted: Sun Nov 20, 2022 3:40 pm
by Jancoe
Well I am just the lucky guy I am. My 2 year old crate linamar 20hp engine that has 60 hours on has an enormous amount of fine silver in the oil. A knock when cold and gone when warm. What's the chances the whole thing doesn't need a full rebuild. I thought the oil change in the spring looked off. I have to get this fixed. Too much going on to have to worry about it. I do have a 16hp that's on a project tractor I may need to pull and install on my current ride. That way I can find time and what's going on. End ramble. Feel better now
Sent from my SM-S906U using Tapatalk
Re: Wish me luck!!!
Posted: Sun Nov 20, 2022 3:51 pm
by Spike188
Wow, only 60 hours. That is a head scratcher and a head banger. I wonder what got missed during manufacturing.
Re: Wish me luck!!!
Posted: Sun Nov 20, 2022 3:59 pm
by Timj
![Shock :O](./images/smilies/yahoo/13.gif)
well that Sucks with a capital "S".
![emotion107 :109:](./images/smilies/yahoo/109.gif)
I'd be sick.
![Barf :barf:](./images/smilies/yahoo/128.gif)
Hopefully you find something "not too major" when you take it apart.
When you are a "lucky guy" like most of us, there always has to be an issue.
Good luck and let us know what you find.
![Geek :geek:](./images/smilies/yahoo/26.gif)
Tim
Re: Wish me luck!!!
Posted: Sun Nov 20, 2022 4:10 pm
by DavidBarkey
@Jancoe Do a compression test before you pull it so know how your ring/bore and valve/ seats
Hope it is nothing to major
Re: Wish me luck!!!
Posted: Sun Nov 20, 2022 5:01 pm
by thebuildist
Wow. That sucks.
@Eugen has an extra diesel engine he's not doing anything with...
Bob
Re: Wish me luck!!!
Posted: Sun Nov 20, 2022 6:17 pm
by Eugen
thebuildist wrote: ↑Sun Nov 20, 2022 5:01 pm
Wow. That sucks.
@Eugen has an extra diesel engine he's not doing anything with...
Bob
Rub it in, will you?!
![Giggle :giggle:](./images/smilies/yahoo/71.gif)
but it's only 10hp.
@Jancoe hopefully it doesn't need a full rebuild. If you don't feel loss of power and you see no smoke it can't be really bad right?
Re: Wish me luck!!!
Posted: Sun Nov 20, 2022 7:14 pm
by JSinMO
An engine with 60 hours knocking, that sucks
Im hoping it’s just a bad bearing. Let’s us know how it turns out.
Re: Wish me luck!!!
Posted: Sun Nov 20, 2022 7:24 pm
by propane1
That’s nasty. Hopefully you can fix her up easy.
Noel
Re: Wish me luck!!!
Posted: Mon Nov 21, 2022 2:10 pm
by Eugen
Jancoe wrote: ↑Sun Nov 20, 2022 3:40 pm
Well I am just the lucky guy I am. My 2 year old crate linamar 20hp engine that has 60 hours on has an enormous amount of fine silver in the oil. A knock when cold and gone when warm. What's the chances the whole thing doesn't need a full rebuild. I thought the oil change in the spring looked off. I have to get this fixed. Too much going on to have to worry about it. I do have a 16hp that's on a project tractor I may need to pull and install on my current ride. That way I can find time and what's going on. End ramble. Feel better now
Sent from my SM-S906U using Tapatalk
I'm trying to make sense of why the knocking goes away when the engine is warm. The knock can be ignition related but given the metal debris in your oil this is unlikely, or main crankshaft bearing related. I don't have experience with this but I found at least one report where the main bearing is worn out and causes knock when the engine is cold.
Whatever the actual cause of the knocking, there is no way to avoid disassembly, IMHO. When you take it apart you'll find out the real cause. Good thing that you have an engine you can use, but it sucks to be forced to replace an engine now.
Re: Wish me luck!!!
Posted: Mon Nov 21, 2022 3:22 pm
by DavidBarkey
Eugen wrote: ↑Mon Nov 21, 2022 2:10 pm
Jancoe wrote: ↑Sun Nov 20, 2022 3:40 pm
Well I am just the lucky guy I am. My 2 year old crate linamar 20hp engine that has 60 hours on has an enormous amount of fine silver in the oil. A knock when cold and gone when warm. What's the chances the whole thing doesn't need a full rebuild. I thought the oil change in the spring looked off. I have to get this fixed. Too much going on to have to worry about it. I do have a 16hp that's on a project tractor I may need to pull and install on my current ride. That way I can find time and what's going on. End ramble. Feel better now
Sent from my SM-S906U using Tapatalk
I'm trying to make sense of why the knocking goes away when the engine is warm. The knock can be ignition related but given the metal debris in your oil this is unlikely, or main crankshaft bearing related. I don't have experience with this but I found at least one report where the main bearing is worn out and causes knock when the engine is cold.
Whatever the actual cause of the knocking, there is no way to avoid disassembly, IMHO. When you take it apart you'll find out the real cause. Good thing that you have an engine you can use, but it sucks to be forced to replace an engine now.
Possibly a cracked piston skirt . Knocking because of excessive movement when cold . But as heats expands and crack opens up flaring the piston skirt tight against the cylinder causing excessive wear on alum. piston ( "silver in oil " ) and the knock to go away . Only ever seen it once and it was a low hour eng. with a defective piston casting .
Re: Wish me luck!!!
Posted: Mon Nov 21, 2022 7:38 pm
by Jancoe
So interesting enough and a small back story. I bought a brand new crate short block from Boomer a few years ago. I sent him a 20hp cam I had and he installed it and shipped it to me. 6 hours on that engine and I had a knock on a cold start up. As it warmed up the sound had disappeared. The noise was very noticeable when cold and quiet when warm. Boomer took care of it and replaced the engine. Now the new replacement was a new crate linamar also. I want to say I got the first engine in the fall/ winter of '18. It wasn't long after and I had a replacement in the spring of '19. This new engine has had several oil changes and a noise when cold but not as bad as the first. I didnt think it was normal, and I also always had some silver in thebnew engine and figured it was breaking in. Is that OK? But this oil change was bad.
I do wonder now if it is a piston slap? I thought that's what was going on with the first engine and quite possibly now. I'm hoping to have the engine swapped out buy this weekend and then i can take a better look at it. I've put in a call to Boomer to pic his brain.
Here's a pic of the cyl walls on the first engine probably 6-8 hours there. All bearings were tight on it.
![Image](//uploads.tapatalk-cdn.com/20221122/2e51919da12fee44c479c8f80adc125d.jpg)
![Image](//uploads.tapatalk-cdn.com/20221122/72c6c09c9114ec88d9b64459def01514.jpg)
![Image](//uploads.tapatalk-cdn.com/20221122/3a19457627f7cccc918050e6f022a1ba.jpg)
Sent from my SM-S906U using Tapatalk
Re: Wish me luck!!!
Posted: Tue Nov 29, 2022 9:44 am
by Eugen
Hard to tell the state of the cylinder walls from pictures.