1974 644 lbh

You're cheating on your Case with another tractor! We want all the dirty details!
User avatar
Harry United States of America
Posts: 1531
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9554 times
Been thanked: 6453 times

1974 644 lbh

Post by Harry »

Here is a pic of my 644 lbh which I've had for about four years now. It's all stock except of a little bucket work to add some forks to the front.
The pic is me moving some nursery stock from my evergreen nursery. Load on front was so heavy I had to raise the hoe to counter balance.
Keep the Peace
Harry
Attachments
IMG_0251.JPG
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
Timj United States of America
Posts: 1449
Joined: Thu Mar 04, 2021 9:57 pm
Location: Central WI
Has thanked: 5254 times
Been thanked: 5058 times

Re: 1974 644 lbh

Post by Timj »

Very nice Harry :113: , and if that's not enough counter weight, take a scoop of dirt.
:132:
Tim
:creeper: deck's on, blades sharp, let's go it's time to mow :48: :446cart:
User avatar
Eugen Canada
Posts: 5173
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 12133 times
Been thanked: 16392 times
Contact:

Re: 1974 644 lbh

Post by Eugen »

A great tractor and your're having fun with it! Nothing better than that Harry!
Case 224, 444, 644, 680E
Kubota B26 :blush:
User avatar
Toolslinger United States of America
Posts: 304
Joined: Wed Mar 03, 2021 12:03 pm
Location: NJ/PA
Has thanked: 23 times
Been thanked: 1472 times

Re: 1974 644 lbh

Post by Toolslinger »

ÀH guy wrote: Tue Mar 23, 2021 6:11 pm Very nice Harry :113: , and if that's not enough counter weight, take a scoop of dirt.
You ain't kiddin... Some years ago after Sandy blew through I was taking out a big old locust stump at my folks place that came over. I split it vertically in half via a couple big chainsaws, and found I was just barely able to lift a half a few inches off the ground before the pressure regulator kicked in. Problem was, the rears had no purchase. So, stretch the hoe out all the way, and fill the bucket with bricks from their patio, and away we went. Just barely. The front bearings and tires didn't last long after that though...
User avatar
Timj United States of America
Posts: 1449
Joined: Thu Mar 04, 2021 9:57 pm
Location: Central WI
Has thanked: 5254 times
Been thanked: 5058 times

Re: 1974 644 lbh

Post by Timj »

Toolslinger wrote: Wed Mar 24, 2021 6:01 am
ÀH guy wrote: Tue Mar 23, 2021 6:11 pm Very nice Harry :113: , and if that's not enough counter weight, take a scoop of dirt.
You ain't kiddin... Some years ago after Sandy blew through I was taking out a big old locust stump at my folks place that came over. I split it vertically in half via a couple big chainsaws, and found I was just barely able to lift a half a few inches off the ground before the pressure regulator kicked in. Problem was, the rears had no purchase. So, stretch the hoe out all the way, and fill the bucket with bricks from their patio, and away we went. Just barely. The front bearings and tires didn't last long after that though...
I've had to do this a few times with my full size backhoe. :3: just goes to show we will always push our machines to the limit to get the job done :78:
:creeper: deck's on, blades sharp, let's go it's time to mow :48: :446cart:
Post Reply