you probably didn't see the current prices of direct burial 6/3 or 8/3 wire and i need about 75 feet it's just crazy, I've been delaying this for 2 years and now the prices are double. I feel like I want to ramble on this but don't want to pollute your sleeve hitch thread
Sleeve hitch for a 446 ?
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12103 times
- Been thanked: 16346 times
- Contact:
Re: Sleeve hitch for a 446 ?
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- propane1
- Posts: 2451
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5820 times
- Been thanked: 8810 times
Re: Sleeve hitch for a 446 ?
Go ahead and ramble Eugen. Makes no difference, ramble away.
I sure would not know any thing about the cost of that type of hook up.
Noel
I sure would not know any thing about the cost of that type of hook up.
Noel
- Timj
- Posts: 1446
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5224 times
- Been thanked: 5045 times
Re: Sleeve hitch for a 446 ?
A k24 is the model you are looking for. A j24 would work but the lift arm would need to be lengthened.Propane57 wrote: ↑Mon Jul 18, 2022 6:10 am I may start looking for a sleeve hitch for my Case 446. So I’m wondering is there a model number for the right sleeve hitch or does it matter. So will any sleeve hitch off a 444, 446, 448 fit ? My tractor is a 1982. As far as I know. I doubt I’ll find one here in PEI. But I’ll put and ad on somewhere and see what happens. I have 4 or 5 sleeve hitch attachments that I could be using. To do work, not have fun.!
Noel
The going rate for used ones from private sellers here seems to be around $200.00US. I don't know what shipping and other charges would tac on from a US dealer for a good used one.
So what would happen if someone from the States would just package something like this up and mail it to someone north of the border?
let's go, it's finally time to blow.
- propane1
- Posts: 2451
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5820 times
- Been thanked: 8810 times
Re: Sleeve hitch for a 446 ?
Thanks for the number Tim. I knew there was a certain number, but I didn’t know when to find it.
I would say it would be expensive to ship some thing like that. I have no idea on the mail route for expense. But I think its the easiest way. Just take longer.
Noel
I would say it would be expensive to ship some thing like that. I have no idea on the mail route for expense. But I think its the easiest way. Just take longer.
Noel
- Timj
- Posts: 1446
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5224 times
- Been thanked: 5045 times
Re: Sleeve hitch for a 446 ?
My main question is if they find a way to fleece you on something sent from person to person.
I don't have one to send you, don't mean to get your hopes up. Was just thinking, they come up here fairly often, there is also a few guys around with tons of stuff, plus Bill at Barneveld Implement.
I don't have one to send you, don't mean to get your hopes up. Was just thinking, they come up here fairly often, there is also a few guys around with tons of stuff, plus Bill at Barneveld Implement.
let's go, it's finally time to blow.
- propane1
- Posts: 2451
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5820 times
- Been thanked: 8810 times
Re: Sleeve hitch for a 446 ?
It’s all about the almighty dollar, as my uncle use to say. The one I saw for sale in States somewhere was about $550.00 US. So add exchange, shipping, plus plus, it could be $1200.00 CA. A lot to much for me.
Noel
Noel
- Timj
- Posts: 1446
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5224 times
- Been thanked: 5045 times
Re: Sleeve hitch for a 446 ?
Holy moly, I know that is a new one, but wow.
I was just doing some shipping estimates. From me to PEI 50lbs would be about $200us USPS. To Bangor, Maine it would be $85.
I think I would see if you can turn one up. Other wise I would start finding steel to build one, even if you're lazy ( somehow I don't believe that ) you have all winter to play with it.
let's go, it's finally time to blow.
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12103 times
- Been thanked: 16346 times
- Contact:
Re: Sleeve hitch for a 446 ?
Noel, which attachments would you use with that beautiful 446 if you had a sleeve hitch?
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- propane1
- Posts: 2451
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5820 times
- Been thanked: 8810 times
Re: Sleeve hitch for a 446 ?
One sod plow, tandem disks, cultivator, potatoe hiller, and there maybe one or two more. Nice to wrap a chain around a post or log and use the sleeve hitch to lift it. A little easier to drag that way.
Norl
Norl
Last edited by propane1 on Wed Jul 20, 2022 11:57 am, edited 1 time in total.
- propane1
- Posts: 2451
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5820 times
- Been thanked: 8810 times