Which seafoam ?
- propane1
- Posts: 2449
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5812 times
- Been thanked: 8802 times
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Which seafoam ?
I always get the one in the first picture. Never seen the other ones before
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- propane1
- Posts: 2449
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5812 times
- Been thanked: 8802 times
- Timj
- Posts: 1445
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5223 times
- Been thanked: 5038 times
Re: Which seafoam ?
I use the one in the first/top picture too.
let's go, it's finally time to blow.
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Which seafoam ?
That first one might be the original formulation, whatever that may mean. There's a version that comes in a spray can, same formula as the first picture, and I got that for many years for spraying into the air manifold whenever I got a used car. It's a way to decarb the head without pulling it off. Lots of examples on youtube (big smoke) on that crazy procedure
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- propane1
- Posts: 2449
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5812 times
- Been thanked: 8802 times
Re: Which seafoam ?
I seen that can there to Eugen.
We use to do that with transmission fluid. Warm up the car engine. Hold throttle open a bit to keep it reved up a bit while pouring in transmission fluid. Then idle it down and stall the engine by just adding a little more transmission fluid. Lots of smoke. Then let it sit. After awhile start it up and drive it like you stole it out the highway. At night if you did it , you could see sparks out the tailpipe from the carbon burning off.
Noel
We use to do that with transmission fluid. Warm up the car engine. Hold throttle open a bit to keep it reved up a bit while pouring in transmission fluid. Then idle it down and stall the engine by just adding a little more transmission fluid. Lots of smoke. Then let it sit. After awhile start it up and drive it like you stole it out the highway. At night if you did it , you could see sparks out the tailpipe from the carbon burning off.
Noel
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10637 times
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12095 times
- Been thanked: 16346 times
- Contact:
Re: Which seafoam ?
yeah, I've done that a few times first thing after getting a used car, but with seafoam.Propane57 wrote: ↑Tue Feb 01, 2022 12:06 pm I seen that can there to Eugen.
We use to do that with transmission fluid. Warm up the car engine. Hold throttle open a bit to keep it reved up a bit while pouring in transmission fluid. Then idle it down and stall the engine by just adding a little more transmission fluid. Lots of smoke. Then let it sit. After awhile start it up and drive it like you stole it out the highway. At night if you did it , you could see sparks out the tailpipe from the carbon burning off.
Noel
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- propane1
- Posts: 2449
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5812 times
- Been thanked: 8802 times
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10637 times
Re: Which seafoam ?
Yes that work back in the days before Catalytic converters and O2 sensors. But that will cause damage to newer vehicles systems . But you can get away with it with the old flat heads .Propane57 wrote: ↑Tue Feb 01, 2022 12:06 pm I seen that can there to Eugen.
We use to do that with transmission fluid. Warm up the car engine. Hold throttle open a bit to keep it reved up a bit while pouring in transmission fluid. Then idle it down and stall the engine by just adding a little more transmission fluid. Lots of smoke. Then let it sit. After awhile start it up and drive it like you stole it out the highway. At night if you did it , you could see sparks out the tailpipe from the carbon burning off.
Noel
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder